Manual Urmet 46 (page 9 of 40) (English, German, Dutch, French, Italian, Spanish)

741501

Zoom out

Zoom in

1/40

DS1168-007

STRUCTURE

1. Module connection wire connector (IN);

2. Programming switch (SW1);

3. Module connection wire connector (OUT);

4. Operation selection jumper:

in stand-alone mode

in 2Voice and Ipercom systems

5. Terminal board

DESCRIPTION OF TERMINALS

AH Common reference for time slots and door opener inputs

S4 Common contact relay 2

S5 Normally closed contact relay 2

S6 Normally open contact relay 2

S1 Common contact relay 1

S2 Normally closed contact relay 1

S3 Normally open contact relay 1

A1 Relay 1 hall door release button

A2 Relay 2 hall door release button

H Time slot input

-~ Power negative (12Vac or 12Vdc)

+~ Power positive (12Vac or 12Vdc)

PROGRAMMING FOR OPERATION IN STAND-ALONE MODE

MASTER PASSWORD PROGRAMMING PROCEDURE

The master password is required to access device conﬁ guration programming mode.

Power the device.

Press the programming switch (SW1) three times in 5 seconds.

The device generates 3 conﬁ rmation beeps and the button turns from blue to red.

Enter the password code (from 3 to 8 digits).

Press to conﬁ rm.

The device will beep 3 times to conﬁ rm. The button turns from red to blue and the device switches to

normal operation.

To modify the master password, if required, disconnect the device from the power supply for at

least ﬁ ve seconds and repeat the procedure described above.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Urmet 46 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Urmet 46 Manual

Product: