741489
6
Zoom out
Zoom in
Previous page
1/12
Next page
6 DS1067-058
A
Holes for fixing on the box of Ø 60
Terminal
board
Description detail
B
Holes for fixing on a 3-seated box
+
BUS Expansion input supply via bus
C
Holes for anti-dropping protection screw
+D
BUS Transmission / data receipt
D
Plastic insertion for anti-dropping protection
D
E
Connection terminal board
BUS Keypad input supply via bus
F
Keypad connector
+IN
auxiliary input
G
Closing screw
A1
Audio Bus
H
Hole for cable transit
A2
For EN50131 Degree 3 classification, always use the anchor bolt in position C, even if the keypad is fixed
to a flush-mounting box. This requirement is not mandatory for Degree 2 or lower installations.
AUDIO BUS CONNECTION
For audio bus connection, use twisted duplex cable. If more Keypads are connected to telephony bus, a
cascade connection has to be used. Audio bus overall length must not exceed 300 metres.
KEYPAD ACQUIRING
To use the 1067/026 touch keypad, after its ignition push the T4 key on the front side (see Fig.4).
If the parameters of the keypad must be cancelled (Reset), proceed as follows:
open the tamper contact (remove the keypad from the related bracket).
push the T4 key for about 5 seconds.
For further information about acquiring procedure, refer to the system installation manual.
CONTROL PANEL
KEYPAD
BUS POWER SUPPLY AND DATA
1067/012X
speech
synthesis
board
AUDIO BUS
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Urmet 1067-026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Urmet 1067-026 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info