525245
83
Zoom out
Zoom in
Previous page
1/91
Next page
Chapter 3: Networking
Illustrations contained in this document are for representation only.
81
IP Stack 1 - for use by the cable company to communicate with the Cable Modem section
only. This stack receives its IP address from the cable company during CM initialization. It
uses the MAC address printed on the label attached to the Wireless Cable Gateway.
IP Stack 3 - for use by you to remotely (i.e. from somewhere on the WAN side, such as at
your remote workplace) communicate with the Cable Modem and Networking sections, to
remotely access the internal web page diagnostics and configuration. This stack is also
used by your cable company to deliver packets between the Internet and the gateway’s
networking section so they can be routed to/from your PCs. This stack requires an IP
address assigned by the cable company from their pool of available addresses. Your cable
company may have you or your installer manually enter assigned addresses into your
gateway, or use a DHCP Server to communicate them, or use a method that involves you
entering host names. This stack uses a MAC address of MAC label + 2 (the MAC label is
found on the bottom of the unit). E.g., if the MAC address is 00:90:64:12:B1:91, this MAC
address would be 00:90:64:12:B1:93.
IP Stack 5 - for use by you to locally (i.e. from somewhere on the LAN side in your home)
communicate with the Cable Modem and Networking sections, to access the internal web
page diagnostics and configuration. This stack is also used by the gateway’s networking
section to route packets between the gateway’s Networking section and your PCs. This
stack uses a fixed IP address: 192.168.0.1. It uses a MAC address of MAC label + 4 (the
MAC label is found on the bottom of the unit). E.g., if the MAC address is
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UPC TWG870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UPC TWG870 in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info