525245
81
Zoom out
Zoom in
Previous page
1/91
Next page
Chapter 3: Networking
Illustrations contained in this document are for representation only.
79
IP Stack 1 - for use by the cable company to communicate with the cable modem section
only. This stack receives its IP address from the cable company during CM initialization. It
uses the MAC address printed on the label attached to the Wireless Cable gateway.
IP Stack 2 - for use by you, the end user, to communicate with the cable modem and
Networking sections, to access the internal web page diagnostics and con guration. This
stack uses a fixed IP address: 192.168.100.1. It uses a MAC address of MAC label + 1 (the
MAC label is found on the bottom of the unit). E.g., if the MAC address is
00:90:64:12:B1:91, this MAC address would be 00:90:64:12:B1:92.
With CM Mode, your cable company must provide one IP address for the CM section, plus one
for each PC you connect from their pool of available addresses. Your cable company may have
you or your installer manually enter these assigned addresses into your PC, or use a DHCP
Server to communicate them to your PCs, or use a method that involves you entering host
names into your PCs.
Note that in CM Mode, packets passing to the Internet to/from your PCs do not travel through
any of the IP stacks; instead they are directly bridged between the WAN and LAN sides.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UPC TWG870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UPC TWG870 in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info