484961
24
Zoom out
Zoom in
Previous page
1/104
Next page
24
START/STOP
For starting and terminating the program. With the Start/Stop-
Button you can terminate the program in every stage. Keep the
button pressed until a bleep can be heard. The starting position
is shown in the display. Should you wish to choose an alternative
program, this can be done with the menu button.
ZEIT + / - TIME PRESETTING
Only use the time presetting for recipes which you have already
tested under close supervision and do not modify these recipes to
avoid overflowing of the dough with all it’s risks.
CAUTION:In case of too much dough the dough may flow over and may
burn on the heating.
Most of the programs , except 6, 7, 10, 11, can be started with
a timing delay. You must add the hours and minutes after which
the preparation is to be started to the time that is automatically
applicable for the respective program and, if appropriate, the
1 hour keep-warm time (following the baking process).
Example:
It is evening 8:00 p.m. and you wish to have freshly baked white
bread at 7:00 in the morning. The ingredients in the prescribed
order are put into the pan and set in the appliance. Care must
be taken that the yeast does not come into contact with liquid.
Choose the required program with the Menu button and enter the
required browning with the KRUSTE button.
In this example we choose program 1 = BASIS/Basic. In order
to get fresh warm bread at 7:00 in the morning, you must set
the timing at 8:00 the previous evening to 10 hours with the
ZEIT/Time button and start the program. The program is finished
at 6:00 a.m., the keep-warm phase starts and ends exactly at
7:00a.m.
ATTENTION:
For time delayed baking please do not use perishable ingredients
such as milk, eggs, fruit, yoghurt or onions, etc.
The beep alert to add ingredients and the beep alert at the end of
the program can not be deactivated for night
operation.
MENU
With the Menu button you can call up the individual programs
that are described in detail in the table “Timing Process”. The
programs are used for the following preparations:
1 BASIS [BASE] The standard programme for all
kinds of bread like white and
brown bread
2 WEISSBROT [WHITE
BREAD]
For especially light white bread
with a longer proving time
3 VOLLKORN
[WHOLEGRAIN]
Wholegrain bread
4 SCHNELL [FAST] For quick preparation of white
and brown bread
5 HEFEKUCHEN
[YEAST CAKE]
For the preparation of sweet yeast
dough
6 EXTRA SCHNELL
[EXTRA FAST]
This programme is only suitable
for clear bread made of superfine
flour or wholegrain wheat and
spelt flour. It is not suitable
for whole-grain/wholemeal or
rye bread. Furthermore, this
programme should in no case be
used to make sourdough bread.
7 DESSERT For baking sweet foods.
8 PASTATEIG For preparation of a pasta dough.
9 TEIG [DOUGH] To prepare dough without baking.
10 KONFITÜRE [JAM] For the preparation of jam and
marmalade. In this case you
should have a second baking pan
you use exclusively to prepare
jam.
11 RÜHRTEIG
[BATTER]
For dough made with baking
powder such as sponge cake.
12 BACKEN [BAKING] For baking of yeast dough or
batter prepared separately
(manually or using the
programme TEIG [DOUGH]).
This programme is not suitable
for short pastry, choux pastry, or
similar.
In the programs 1 to 6 several beeps during the second kneading
phase remind you to add more ingredients such as nuts, seeds,
dried fruit etc. Just open the lid, add the ingredients and close
the lid again.
KRUSTE/CRUST
To select the browning degree of the crust: HELL/LIGHT, MITTEL/
MEDIUM or DUNKEL/DARK, available in the programs 1-7, 11,
12. The respective setting is indicated by an arrow in the LCD
display.
GRÖSSE/SIZE
This enables the following setting in the various programs:
KLEIN = for a small bread weight, approx. 750-1.000 g
GROSS = for a larger bread weigh, approx. 1000-1.200 g
Please bear in mind that the bread size cannot be adjusted in
the programmes DESSERT, PASTATEIG [PASTA], TEIG [DOUGH],
KONFITÜRE [JAM], RÜHRTEIG [BATTER] and BACKEN
[BAKING]. You will find our corresponding recommendations in
the recipes. The adjustment is indicated on the display.
EXPLANATIONS OF THE CONTROL PANEL
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 68100 Backmeiser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 68100 Backmeiser in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info