484975
16
Zoom out
Zoom in
Previous page
1/64
Next page
16
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
parts of the appliance, since this could
cause it to become damaged.
17. If you use an extension cord, make sure
that it is intact and suitable for the power
draw of the appliance; otherwise, there is a
possibility of overheating.
18. If you use a cable reel as an extension cord,
the power cord must be completely unwound
to prevent the possibility of overheating.
19. Use the electric grill only if the water pan is
filled with water, since otherwise the bottom
of the grill will overheat.
20. Use the electric grill only indoors or in
protected outdoor areas, such as a balcony
or other covered area.
21. Do not place the electric grill directly next to
a wall or near flammable materials, such as
curtains, during use.
22. Never use charcoal or other flammable
fuels.
23. In order to avoid overheating, this appliance
shall not be covered by any solid or flexible
material such as an aluminum tray,
aluminum foil or trays made of other heat
resistant material. The use of such items
or materials on the grille would impair the
safety of your product and could lead to
serious damage.
24. Do not touch the grill and the grill grate as
long as they are still hot - danger of burns!
25. Do not use the appliance with accessories of
other manufacturers or brands, in order to
prevent damage.
26. Unplug the appliance from the power supply
after use and prior to cleaning. Never leave
the appliance unattended when it is plugged
in to the power supply.
27. Clean the appliance after every use (see
chapter on Cleaning and Care, page 17).
28. Check the appliance, the plug and the
power cord regularly for wear or damage. In
case of damage to the power cord or other
parts, please send the appliance, or only the
heating element, for inspection and/or repair
to our after sales service (for address, see
warranty terms). Unauthorized repairs can
result in serious risks to the user and void
the warranty.
CAUTION:
The appliance becomes very hot during
operation!
ASSEMBLY AND PREPARATION FOR OPERATION
1. Remove all packaging materials.
2. Clean all parts with a damp cloth, as descri-
bed in the chapter “Cleaning and care” on
page 17.
3. Push the legs (11) through the holes in the
tray (10).
4. Set up the stand, and if necessary turn the
stand legs to that the appliance stands sta-
bly. If necessary, push the end caps for the
legs into position.
5. Push the pipes (9) up into the holes in the
tray.
6. Press the insert (7) onto the stand by apply-
ing pressure to it.
7. Fix the spacers (6) into the recesses provi-
ded for this purpose on the insert. In doing
so, the side with the three openings must
face upwards.
8. Insert the provided handles (without picture)
in the grill housing insert (7) by pressing
them from below in the respective groove,
until the clutch engages.
9. A sure transport of the device is guaranteed
by the handles.
10. Fit the side tray (8) by pushing the wider
side of the side tray onto the corresponding
holder on the insert.
11. Place the water tray (5) onto the opening in
the insert. Please ensure that the two ope-
nings on the water tray face upwards on the
insert as a recess for the heating element
(4).
12. Ensure that the grill table is stable.
13. Fill the water tray with at least 400 ml of
water. Never operate the grill without first
filling the water tray.
14. Insert the heating element (4). The insert
is correspondingly recessed for the control
unit. Please insert the heating element very
firmly, as otherwise the built-in safety switch
on the lower side of the control unit prevents
the appliance from being switched on.
15. Place the grill plate (3) into position.
16. Push on the wind shield (2); for this, the
notches on the wind shield must point
downwards. If required, now push the small
gridwork shelf (1) into position on the wind
shield.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 58565 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 58565 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info