484957

Unold 48946 Manual

17
Zoom out
Zoom in
Previous page
1/56
Next page
9. When the ice container is full, the symbol
(9) lights up red.
10. The appliance automatically stops making
ice cubes.
11. Remove the ice container and empty it. Insert
the ice container back into the appliance.
If you wish to restart the appliance, press
„STOP“ and then „START“.
12. Please note that you have to hold the ice
container slightly slanted when inserting it
in the appliance.
13. The ice cube maker automatically checks
the water level in the water tank. When the
ice container is full, the display (10) lights
up.
14. The appliance automatically stops making
ice cubes. Add water. As soon as enough
water has been added, the process continues
automatically.
15. You can interrupt the making of ice cubes
any time by pressing the “Stop” button (7).
16. Once you have stopped making ice cubes,
remove the ice container and empty it. Drain
any remaining water from the appliance as
described in the section “Draining water”.
17. Please remember not to leave the ice cubes
in the ice container too long, since they will
start to melt. If you do not wish to use the
ice cubes right away, you can store them in
the freezer.
18. After use, please leave the ice cube maker
open to prevent the formation of mold or
bacteria.
19. The water must be changed after 24 hours
at the latest, for reasons of hygiene.
17
Draining watEr
To drain the water from the appliance, please proceed as follows:
1. Turn off the appliance and unplug it from the
power supply.
2. Hold the appliance over a sufficiently large
bowl or the kitchen sink.
3. Remove the cap on the residual water drain
(5) on the bottom of the appliance.
4. Pull out the drain plug. Please make sure
that the plug does not fall into the sink
drain. Our recommendation: place a large
sieve over the sink drain or close it with a
stopper.
5. Wait until the water has drained completely
from the appliance and then plug the drain
again.
6. Make sure not to tilt the appliance too far, to
prevent damage to the compressor.
clEaning anD carE
1. Before cleaning, always turn off the appliance
and unplug it from the power supply.
2. Do not immerse the appliance and power
cord in water or other liquids or wash them
in the dishwasher.
3. Wipe off the ice cube maker with a damp
cloth. You can clean the ice container with a
little warm dishwashing water.
4. The water tank can also be cleaned with a
damp cloth, if necessary.
5. The ice container is not dishwasher-safe.
6. Do not use any abrasive scouring agents,
steel wool, metal objects, hot cleaning
agents or disinfectants.
7. After use, please leave the ice cube maker
open to prevent the formation of mold or
bacteria.
8. The appliance and power plug must be
completely dry before the appliance can be
operated again.
9. When completely dry, store the ice cube
maker in a dry, safe place so that it is pro-
tected from dust, shocks, heat and mois-
ture.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 48946 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 48946 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info