484957
16
Zoom out
Zoom in
Previous page
1/56
Next page
16
bEforE using thE aPPliancE thE first timE
1. Remove all packaging materials and any
transport safety devices.
2. Check to make sure that all accessories are
present.
3. Clean all parts with a damp cloth, as
described in the chapter “Cleaning and
care” on page 18.
4. Check to make sure that all parts are assem-
bled correctly and the appliance is stable
and level.
5. Now connect the power cord to the back of
the appliance.
6. Connect the appliance via the power cord to
the power supply (220-240 V~, 50 Hz).
7. The indicator lamp for medium ice cubes
(12) blinks green.
The appliance is intended for household use only. The manufacturer will not be liable in the event of
improper or incorrect use or if repairs are carried out by unauthorized third parties.
When unpacking the appliance and removing the packaging material, make sure not to tilt the
appliance more than 45 °, to prevent damage to the compressor inside the appliance.
After unpacking, please do not operate the appliance for at least two hours. The coolant in the
appliance has to first settle, to prevent damage to the compressor.
If you wish to move the appliance, please use the handles on the bottom of the appliance.
making icE cubEs
1. Prepare the appliance as described in the
section “Before using the appliance the first
time”.
2. Remove the ice container (4) from the
appliance by pulling it forward.
3. Fill the water tank with fresh, clear, cold
water to the “Max” marking. Do not fill
water past the “Max” marking to prevent
water from spilling out. Ice cubes can-not
be made from fruit juice. The acid can
result in damage.
4. Push the ice container back into the app-
liance.
5. Select the desired ice cube size. You can
choose from the following sizes:
Large ice cubes with a diameter
of approx. 3 cm
Medium ice cubes with a diameter
of approx. 2 to 3 cm
Small ice cubes with a diameter
of approx. 1.5 to 2 cm
6. To select the size, press the “Ice cube size”
button (8) until the indicator lamp lights up
green at the desired size.
7. Press the “Start” button (6).
8. The appliance starts making ice cubes. The
first ice cubes that are made do not have the
selected size, since it takes several minutes
before the appliance reaches the right ope-
rating temperature. Therefore, the first ice
cubes are somewhat smaller.
25. Check the appliance, the plug and the power
cord regularly for wear or damage. In case
of damage to the power cord or other parts,
please send the appliance for inspection and
repair to our after sales service (for address,
see warranty terms, page 43). Unauthorized
repairs can result in serious risks to the user
and void the warranty.
26. If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 48946 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 48946 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info