485061

Unold 48010 Manual

21
Zoom out
Zoom in
Previous page
1/68
Next page
21
Problem Solution
The bag cannot be sealed. Check to make sure that the cover of the vacuum
packing machine is properly closed. If the cover is
loose, the appliance will continually create a vacuum
and cannot seal the bag or container.
Remnants of fat, liquids, crumbs, etc. in the vicinity
of the sealing strip can keep the bag from sealing.
Open the bag, clean the affected area thoroughly and
seal it again.
No vacuum can be created in the
container.
Check to make sure that the arrow on the lid of the
container is set to “Vacuum”.
Make sure that the hose is correctly connected.
Check to make sure that there is at least 1 cm of
space between the contents and the top edge of
the container, since otherwise no vacuum can be
created.
Make sure that the container and the lid are not
damaged by hairline cracks. Hairline cracks can
cause the container to leak, and no vacuum can
be created. In this case, the container has to be
replaced.
The vacuum bottle stopper does not
create a vacuum.
Make sure that the vacuum bottle stopper is properly
inserted in the bottle. If it is too loose, air can enter
the bottle, preventing a vacuum from forming.
Make sure that the edge of the bottle and the bottle
stopper are undamaged and free of fat, crumbs, etc.
Impurities on the bottle stopper or the bottle can
prevent a vacuum from forming.
Make sure that the hose is correctly connected.
The appliance is working but can not
seal the bag.
When the appliance is working time too long, the
heating thread is overheated. In order to ensure
the machine safety and the sealing performance,
the heating thread is stopped by the temperature
controller. In this case please stop the appliance
working for about two minutes; the heating thread
will cool down. Then restart the appliance.
If you have any questions, our after sales service will be glad to assist you.
After Sales Service, Germany Tel.: +49 (6205) 94 18-27
Mannheimer Straße 4 Fax: +49 (6205) 94 18-22
68766 Hockenheim E-mail: info@unold.de
http://www.unold.de
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 48010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 48010 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info