484982
17
Zoom out
Zoom in
Previous page
1/66
Next page
17
PREPARING COFFEE WITHOUT TIMER
1. Prepare the appliance as described in chap-
ter “Before preparing the first coffee“.
2. Fill the water tank with the desired amount
of clear, fresh water. To do so, you may use
the graduated glass jug, which also indi-
cates the number of cups. A minimum of
two cups (270 ml) has to be poured in. The
maximum amount is of 10 cups (1,350 ml).
Make sure not to overfill the water tank as
the excess of water will leak from the back
of the appliance.
3. The amount of water poured in is always
slightly higher than the amount of coffee,
as the coffee powder absorbs some water.
4. Open the flap of the coffee machine pushing
the button “ÖFFNEN” [open]on the right
side of the appliance.
5. Insert the permanent filter in the filter bas-
ket. Alternatively you may use paper filter
bags size 4.
6. When using the permanent filter, coffee
grounds may accumulate in the glass jug.
This has technical reasons and is not due to
a defect of the appliance.
7. Attention: When using the permanent fil-
ter, please make sure that the handle of
the permanent filter points to the front of
the coffee machine after inserting the fil-
ter. Otherwise the handle overlaps the filter
and hinders the water from flowing on to the
coffee powder.
8. Remove the lid of the coffee beans con-
tainer. Fill the coffee beans container with
coffee beans. When buying coffee beans,
make sure that they are suitable for coffee
grinders. Please do not use coffee beans for
fully automatic coffee machines, as the cof-
fee will not have a satisfactory taste due to
the different coffee roasting.
9. Remember that the coffee beans container
always has to be half full. The maximum
capacity is of approx. 240 g.
10. Do not overfill the coffee beans container, in
order to avoid damage to the grinder.
11. Close the coffee beans container with the
lid.
12. Adjust the grinding selector to the desired
degree of grinding. You can select between
coarse, medium and fine in nine steps.
13. Connect the plug to the wall socket.
14. The appliance indicates the readiness for
operation by beeping two times.
15. In case the clock is not yet adjusted, you
may adjust it now, but you can also prepare
coffee without adjusting the clock. For more
information on how to adjust the clock, see
chapter “Adjusting the clock” on page 10.
16. Select the desired number of cups pushing
the button “2-10 TASSEN” [2 - 10 cups]
until the desired number of cups lights up.
You may choose between 2, 4, 6, 8 and
10 cups. Please make sure to select exactly
the number of cups that have been pou-
red in. If you poured in water for two cups,
you have to select two cups, if you poured
in water for four cups, you have to select
four cups and so on. This guarantees the
optimum coffee taste. The coffee machine
grinds exactly the right amount of coffee
beans.
BEFORE PREPARING THE FIRST COFFEE
1. Remove all packaging materials and any
transport safety devices.
2. Clean the glass jug, the permanent filter
and the filter holder as described in the
chapter „Cleaning and care“.
3. Clean the exterior of the appliance with a
damp cloth.
4. Fill the water tank with tap water up to the
MAX/10 cups mark. Make sure that there
are no coffee beans in the coffee beans
container
5. Connect the plug to the wall socket.
6. The appliance indicates that it is ready for
operation by beeping repeatedly.
7. The “filter” indicator flashes and is only
inactive while preparing coffee and in the
programming mode.
8. Push the button „MÜHLE AUS“ and „EIN/
AUS“ once and let the water run through
until the appliance indicates by beeping
again that the process has been finished.
9. Pour this water away.
10. Switch the appliance off pushing the button
„EIN/AUS“.
Before preparing the first coffee, please make the coffee machine work once or twice without any
coffee powder in order to remove possible manufacturing residues. Even if the appliance has not
been used for a while, we recommend one operation without any coffee powder.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 28716 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28716 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info