485024

Unold 28497 Manual

21
Zoom out
Zoom in
Previous page
1/80
Next page
21
PROGRAMMING THE FILL QUANTITY
1. When programming the fill quantity, make
sure that there is enough milk in the milk
tank and always place a large enough con-
tainer under the milk spout.
2. To reset the appliance to the factory setting,
press buttons A and B simultaneously for
3 seconds.
Hot milk
3. You can change the quantity and duration
for preparation of the milk. With the factory
setting, the appliance prepares 150 ml of
hot milk in 30 seconds.
4. Press the A button for about 3 seconds until
the button starts to flash.
5. The appliance prepares hot milk until you
press the A button again.
6. From this point on, the appliance will always
prepare this amount of hot milk. The setting
can be adjusted from 5-60 seconds. When
set to 60 seconds the appliance prepares
about 300 ml of hot milk.
Frothed milk
1. You can change the quantity and duration
for preparation of the milk. With the factory
setting, the appliance prepares 100 ml of
frothed milk in 20 seconds.
2. Press the B button for about 3 seconds until
the button starts to flash.
3. The appliance prepares frothed milk until
you press the B button again.
4. From this point on, the appliance will always
prepare this amount of hot milk. The setting
can be adjusted from 5-30 seconds. When
set to 30 seconds the appliance prepares
about 100 ml of hot milk.
ENERGY SAVING (STAND-BY) MODE
1. If you do not use the appliance for 5 minu-
tes it automatically switches to stand-by
mode. All three buttons light up one after
the other.
2. To leave stand-by mode, press either button
A or B briefly.
3. You can extend the time after which the
appliance switches to stand-by mode to 30
minutes. To do this, switch the appliance
off.
4. Press the B button and switch the appliance
on. Keep the B button pressed until all but-
tons light up. Now the appliance will switch
to stand-by mode after 30 minutes.
5. If you wish to reset this setting to 5 minu-
tes, proceed as described above, but keep
button A pressed until all the buttons light
up.
SAFETY FUNCTION
If the front cover or the milk tank are removed from the appliance, the CLEAN button flashes quickly
and the appliance will not prepare any more milk.
CLEANING AND CARE
For hygienic reasons, the appliance
must be cleaned immediately after
every use. Otherwise, the remnants
of the milk could foster the growth of
health-harming germs.
Before you use the appliance cleaning program:
1. Fill the water tank with fresh, cold tap water
(max. 600 ml) and insert the tank in the
appliance.
2. Remove the milk tank from the appliance
and insert the cleaning cup.
3. To clean the appliance thoroughly, also fill
the milk tank with water (at least 200 ml,
but not more than 600 ml of water).
Short cleaning program
4. Before the first daily use of the appliance
and in between, if the appliance has not
been used for longer than 30 minutes.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 28497 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28497 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info