Manual Unold 28497 (page 19 of 80) (English, German, Dutch, French, Italian, Spanish)

485024

Zoom out

Zoom in

1/80

BEFORE FIRST USE / AFTER EXTENDED NON-USE

1. Remove all packaging materials and any

transport safety devices.

2. Clean all parts with a damp cloth, as descri-

bed in the chapter “Cleaning and care” on

page 21.

3. Check to make sure that the appliance is

stable. Choose a cool, shady spot, since

direct sunlight or heat from an oven can

cause the milk in the milk tank to warm

more quickly and spoil.

4. Fill the water tank with 600 ml fresh, cold

tap water.

5. Caution: Do not use carbonated or distilled

water. This could damage the appliance.

However, non-carbonated bottled water is

safe to use.

6. Insert the cleaning cup in the appliance.

The long spout of the container must slide

into the guide rail in the base housing.

7. Connect the end of the power cord with the

socket on the side of the appliance.

8. Plug the other end of the power cord into

an electrical outlet (220-240 V~, 50/60 Hz)

and switch on the appliance with the ON/

OFF switch.

9. First, the two buttons A + B will flash. This

indicates that the appliance is in the war-

ming phase.

10. As soon as both buttons remain illuminated,

press the “Clean” button. The cleaning pro-

gram starts.

11. The cleaning program is finished after about

30 seconds and then you can use the appli-

ance.

BEFORE DAILY USE

1. Fill the water tank with 600 ml fresh, cold

tap water.

2. Pour fresh, cold milk into the milk tank. You

must pour in at least

200 ml of milk, but

not more than 600

ml. Close the milk

tank with the corre-

sponding lid. Make

sure that the suction

tube is seated firmly

in the lid.

3. Insert the milk

tank into the base

housing (see illustra-

tion). Make sure that

the milk tank locks

into place.

4. Depending on the size of the cup used, now

place the drip tray and drip grate under the

milk frothing head.

5. Plug the power cord of the appliance into

an electrical outlet (220-240 V~, 50/60 Hz)

and switch it on with the ON/OFF switch.

6. First, the two buttons A + B will flash. This

indicates that the appliance is in the war-

ming phase.

7. Place a cup on the drip tray.

8. As soon as the A + B buttons remain illumi-

nated press the “B” button and wait for the

appliance to prepare one portion of frothed

milk, which you then discard.

9. The appliance is now ready for daily use.

TIPS FOR PROPER USE OF THE MILK

1. Make sure that the milk was refrigerated

before use. It should be at a temperature of

about 4°C for best results.

2. Replace the milk in the milk tank every

hour, if possible.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28497 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 28497 Manual

Product: