485025

Unold 28440 Manual

21
Zoom out
Zoom in
Previous page
1/68
Next page
21
5. Replace the lid. Note: a safety function pre-
vents the appliance being switched on if the
lid does not sit properly. In this case, the
button only flashes, but the appliance does
not start. Press the lid on to the appliance
until it clicks into place.
6. If you want to prepare hot milk froth, press
button A.
7. If you want to prepare cold milk froth, press
button B.
8. If you want to prepare a salad dressing, also
press button B. Remember that you can
only prepare cold salad dressings with the
appliance.
9. The corresponding indicator light shows that
the appliance has started frothing the milk.
10. The milk froth is ready in about 120 seconds
and the appliance stops automatically.
11. If you wish to interrupt the process, press
the selected button again.
12. Press the locking button and remove the lid
from the appliance.
13. You can now pour or spoon the milk froth
into a container.
14. If you wish to froth more milk, allow the
appliance to cool for 2 to 4 minutes. Then
clean the jug as described in Cleaning and
Care.
Important: Make sure that there is
no milk residue in the jug to prevent
germs forming. Clean the appliance
after every use.
MILK HEATING FUNCTION
1. Prepare the appliance as described in
„Frothing milk“.
2. Remove the milk frother accessory from the
agitator.
3. Add at least 100 ml milk (min. mark), but
no more than 330 ml (top max. mark) to the
jug. Never add more milk, since the milk
may overflow from the jug.
4. Replace the lid. Note: a safety function pre-
vents the appliance being switched on if the
lid does not sit properly. In this case, the
button only flashes, but the appliance does
not start. Press the lid on to the appliance
until it clicks into place.
5. To heat milk, press button A.
6. The indicator light shows that the appliance
starts heating the milk.
7. If you wish to interrupt the process, press
the selected button again.
8. Press the locking button and remove the lid
from the appliance.
9. You can now pour the milk into a container.
10. If you wish to heat more milk, allow the
appliance to cool for 2 to 4 minutes. Then
clean the jug as described in Cleaning and
Care.
11. Tip: When you are finished heating milk,
replace the milk frother accessory so that it
doesn‘t get lost.
Important: Make sure that there is
no milk residue in the jug to prevent
germs forming. Clean the appliance
after every use.!
A
B
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 28440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28440 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info