Manual Unold 28416 (page 18 of 52) (English, German, Dutch, French, Italian, Spanish)

404241

Zoom out

Zoom in

1/52

BREWING COFFEE WITH THE TIMER FUNCTION

1. Please follow steps 1-8 of the previous

chapter Preparation of coffee without timer

function.

2. Then press the PROG button once and

check, if the clock has been set correctly

(see chapter Presetting of the clock).

3. Then press again the button PROG to preset

the brewing.

4. The display shows TIMER in the upper left

corner.

5. Press the buttons STD and MIN until the

required time is preset.

6. Then press the EIN/AUS button (ON/OFF)

twice to activate the RUN/AUTO function.

7. The control light RUN/AUTO turns on and

keeps on lighting.

8. To check the preset time, press the PROG

button twice. The display shows TIMER

and the preset time. If necessary you can

change the time.

9. If no button is pressed, the display will

return to the actual settings after approx.

10 seconds.

10. You can stop the RUN/AUTO-function at any

time by pressing the EIN/AUS button twice.

11. When reaching the preset time, the blue

control light turns off and the red one turns

on, brewing starts. The blue LEDs in the

glass bottom are switched on.

12. After the end of brewing you can switch off

the appliance pressing the button EIN/AUS

(ON/OFF) twice.

13. If the appliance is not switched off, the

warming plate keeps warm. Two hours after

beginning of the brewing, the appliance will

switch off automatically.

14. If the appliance switches itself off before the

brewing is finished, it might be calcified. In

this case please follow the instructions of

the chapter Cleaning and Descaling.

15. The preset time is kept and can be

reactivated by pressing the EIN/AUS button

twice.

16. If you want to change the time presetting,

just restart as described above.

15:00

Timer

DESCALING

1. Regular descaling increases the lifetime and

the performance of your coffeemaker

2. If the appliance switches off before the end

of the keep-warm period of 2 hours or if

water stays in the water tank after brewing,

the appliance should be descaled.

3. We recommend to us a commercial

descaler according to the instructions of the

respective manufacturer.

4. Fill the water tank up to the MAX mark with

the descaler solution.

CLEANING THE APPLIANCE

1. Allow the appliance to cool before cleaning it.

2. Before cleaning, always turn off the appliance

and unplug it from the power supply.

3. Do not immerse the appliance and power

cord in water or other liquids or wash them

in the dishwasher.

4. Open the lid of the appliance and remove

the permanent filter. Dispose of the coffee

grounds.

5. Condensation can collect above the filter.

After brewing coffee, wipe off the bottom of

the lid with a dry cloth.

6. Wipe off the housing and the warming plate

with a damp cloth and a little dishwashing

detergent. Do not use any abrasive scouring

agents, steel wool, metal objects, hot

cleaning agents or disinfectants, since they

can damage the appliance.

7. Clean the pot, its lid, the filter holder and

filter in water with a little dishwashing

detergent added.

8. The appliance must be completely dry

before you use it again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28416 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 28416 Manual

Product: