Manual Unold 28416 (page 17 of 52) (English, German, Dutch, French, Italian, Spanish)

404241

Zoom out

Zoom in

1/52

SETTING THE TIME

BREWING COFFEE WITHOUT THE TIMER FUNCTION

1. Take out the water tank (open the lid and

use it as handle) and fill it with the desired

amount of cold water. The marking refers to

the number of cups. Place the water tank on

the machine.

2. Please keep in mind that a certain portion

of the water may evaporate during brewing.

3. For filling in ground coffee, open the filter.

Insert the filter holder. Take care that the

projection of the filter holder fits into the

recesses of the housing. If not placed

correctly, the filter cannot be closed.

4. Insert the permanent filter into the filter

holder.

5. Optionally you can also use filter paper (size

1x4, 0994) after having folded the edges.

The filter paper must not project over the

filter holder.

6. Add the desired amount of ground coffee,

depending on your taste 5-7 g (max.

1 measuring spoon) of medium ground

coffee. If the coffee is ground too fine,

the filter paper may be clogged up and the

coffee may overflow.

7. Close the filter.

8. Place the carafe with lid on the warming

plate.

9. Press the button EIN/AUS (ON/OFF). The

red control light EIN (ON) will turn on and

brewing starts. At the same time the glass

bottom of the appliance will be lighted by

blue LEDs.

10. Do not open the lid of the filter during

brewing.

11. After the end of brewing you can switch

off the appliance pressing twice the button

EIN/AUS (ON/OFF).

12. If the appliance is not switched off, the

warming plate keeps warm. Two hours after

beginning of the brewing, the appliance will

switch off automatically. The blue LEDs will

switch off.

13. If the appliance switches itself off before the

brewing is finished, it might be calcified. In

this case please follow the instructions of

the chapter Cleaning and Descaling.

1. As soon as the coffeemaker is connected to

the power supply the display shows 12:00.

2. Press the “PROG” button.

3. The display shows “CLOCK” at the upper

right.

4. Now press the “STD” and “MIN” buttons

until the current time is set.

5. After about 10 seconds with no input the

appliance returns to the initial state; you

now see the current time and can start

brewing coffee.

6. In case of a power outage lasting longer

than about 10 seconds the time is not

saved, which means you have to reset the

time whenever the appliance has been

unplugged.

12:00

Clock

rinse them with clear water and dry them

thoroughly.

4. Wipe the surface of the appliance with a

damp cloth and dry it.

5. Remove the water tank. You can tilt up both

lid elements and use them as handle.

6. Fill the water tank up to the MAX marking

with fresh cold water. Close the lid and

place the tank on the housing.

7. Put the plug into the socket.

8. Before using the appliance for the first

time or after a longer period, fill the water

container up to the maximum with clear

cold water and run it two or three times with

water only.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28416 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 28416 Manual

Product: