819265
6
Zoom out
Zoom in
Previous page
1/10
Next page
19
22
Battery Replacement
1. Replace battery when " appears in the buttom " of LCD
display. (See Figure 10)
2. Slide battery cover down as shown in Figure 11.
3. Remove battery and install 2 new AAA alkaline batteries
as shown . in Figure 12
4. Slide battery cover back on.
Figure10
Figure11
Figure 12
20
21
Care And Cleaning
7. Store the thermometer and probe cover in a dry location, free
from dust and contamination and away from direct sunlight.
8. Periodic cleaning and disinfection of the device following use to
prevent patient cross infection.
-Use a soft cloth slightly moistened with a 75% isopropyl alcohol
solution to disinfect the thermometer and probe. Do not use
abrasive cleaners.
9. Ensure that children do not use the instrument unsupervised;
some parts are small enough to be swallowed.
10.Do not remove or modify the equipment without permission.
11. Strong electromagnetic fields may interfere with the proper
operation of the thermometer. The device needs special
pre-cautions regarding EMC according to the EMC information.
12. Put the thermometer back to the original packaging after using.
13. It is not intended for use in the oxygen rich environment and
presence of flammable anesthetic mixture with air, oxygen or
nitrous oxide.
Figure 6
Figure 5
Memory Mode
3.
The user can press the Test Button to take new measurements.
In the memory mode, mark or mark will not change.
1. The Memory Mode can be accessed ether in ear mode or object
mode:
When the thermometer has been turned on and followed by
Figure 2/4 or finished testing, press and hold the Button
for three seconds. The letter MEM will appear at the bottom of
the display. (See Figure 5)
2. The thermometer will automatically memorize the last 30
temperature readings.
Each time the Button
is pressed, the screen displays past readings that correspond
with a number 1-30. The number 1 reflects the most recent
reading, while the number 30 reveals the oldest reading stored
in memory.(See Figure 6)
Each memory also records the
measurement date/time/mode icon.
Care And Cleaning
1. Probe covers are intended for single use only!
Absent, damaged, perforated, or soiled probe covers can lead to
inaccurate temperature readings.
2. The probe window must be kept clean, dry, and undamaged at all
times to ensure accurate readings. The accuracy of temperature
readings can be affected by damage to the probe window, or the
presence of dirt and ear wax on the probe window.
3. Fingerprints, earwax, dust and other soiling compounds reduce
transparency of the window and result in lower temperature
readings. If the thermometer is accidentally placed in the ear
without a probe cover installed, the window must be cleaned
immediately.
4. The probe window is the most delicate part of the thermometer.
To safely clean the window, gently wipe its surface with a cotton
swab slightly moistened with isopropyl alcohol and immediately
wipe dry with a clean cotton swab. After cleaning, allow at least
5 minutes drying time before taking temperatures.
Note: Do not use any chemical other than isopropyl alcohol to
clean the probe window.
5. Use a soft, dry cloth to clean the thermometer display and
exterior.
6. Do not put the thermometer into water directly.
Product Description
1. Probe Cover
2. Probe
3. Test Button
4. Button
5. Battery Cover
6. Setting Button
3
1
2
5
3
4
6
Electromagnetic Compatibility Information Electromagnetic Compatibility Information
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unknown DET-1015b Infrared Ear Thermometer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unknown DET-1015b Infrared Ear Thermometer in the language / languages: English as an attachment in your email.

The manual is 4.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info