528076
35
Zoom out
Zoom in
Previous page
1/40
Next page
User’s Manual · U5101
Reserved of technical modifications and/or errors - 35 - U5101 Version en_1.1 Univers by FTE
9.2. Antenna Configuration
In this menu you should configure the signals that are connected at the
inputs IF IN of your PVR.
By default, the equipment comes with the configuration that you can see in
the Picture with four satellites.
The available options in this screen allow:
Red button: Deletes the selected satellite. It requests for confirmation.
Green button: Edits the selected satellite. The option appears in the following
image.
Yellow button: Adds a satellite. The options appear in the below image.
Antenna Options:
- Name: Your PVR is provided with
several satellites pre-stored. You can
find the one you want in the list or to
add a new one. They are sorted by
its orbital position. With the key
you can access to the available
satellite list.
- Band: There are two available bands:
C and Ku. The difference is basically
the transmission frequency. The Ku
band has two possibilities, the most
common is the universal Ku.
- Low Band / High Band: It is used
when the band selection is Ku one,
and it programmes the Local
Oscillators of the LNC.
- DiSEqC 1.0 / 1.1 Ports: To configure the use of antenna switch. These switches allow the
reception of different satellites in a single input.
- Motor: Enables the function of using a motor to direct the antenna.
- 22 KHz: Tone to switch the band of the LNC.
- LNB Power: Feeding to the LNB. By default the selection is the one for an universal LNB.
- Signal: It shows if there is an available signal in the selected configuration.
LIST button: It changes the selection of the antenna to input 2. This
function is only possible when it has been selected previously that there
are two LNB available. In case of selecting 1 or LOOPTHROUGH, the
second input is not available. The system to select the satellites to the
input 2 is exactly the same to the input 1, using the Yellow button to add
satellites.
Alter whatever change, you should confirm with the OK button when you
exit the menu.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Univers by FTE U5101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Univers by FTE U5101 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info