528076
34
Zoom out
Zoom in
Previous page
1/40
Next page
User’s Manual · U5101
Reserved of technical modifications and/or errors - 34 - U5101 Version en_1.1 Univers by FTE
Chapter 9 Installation
In this menu, you can make the complete installation of the channels,
configuring the antennas, Transponders, importing channel lists or making
backup copies (backup).
9.1. Connection Type
In this menu, you can configure the inputs to be viewed.
One LNB: In this case, you only will have channels in one tuner. This option
has some limitations in how woks the PVR:
- Recording: During the recording process of one channel,
you only will be able to select channels which are located
in the same transponder, it is, a limited number of
channels will be available to be viewed.
- PiP: When this function is being executed, the active
channel becomes the small window and in the main
window you only can see the channels of the active
transponder of the small window.
Two LNB: In this case, you will dispose of two active inputs. You should take in account the following
indications, based in how these signals are:
- Both input signals are the same, it is, in both cables there are the same available signal.
This option is very usual when it is being used Twin LNB. This is the most
recommended installation.. In these cases, there is no limitation in how the PVR
works.
- Both signals come from different satellites. In this case, the system is limited during the
recording or PiP functions, in a similar way to the example with one input, but in this
case, when a channel is being recorded it is possible to see the channels which are in
the same transponder or all the channels located in the other input.
Loopthrough: In this case it is an extension of the one input option. In this situation, you connect one
bridge between the IF OUT 1 output and the IF IN 2 input. This bridge allows the signal which arrives to
tuner 1, arriving also to tuner 2. It is important to know that the satellite signals vary depending the voltage
and tone supplied from the receiver, in this way different reception bands can be selected. When this
option in enabled, the available signals in both inputs are in the same satellite band, so during the
recording and PiP functions, the availability of viewing channels is reduced to the same transponder
channels which are being viewed or whatever channels located in the same satellite band which is being
viewed.
Select with buttons
the Type of Connection row and push OK.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Univers by FTE U5101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Univers by FTE U5101 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info