806607

United office ULG 300 A1 - IAN 273398 Manual

10
Zoom out
Zoom in
Previous page
1/53
Next page
- 7 -
³The finished laminated pocket is now ejected
from the foil slot aof the laminator.
Only after hot lamination:
³Remove them immediately from the appliance,
as hot foil pockets can still be easily deformed.
Place them on a flat surface to cool down.
To improve the lamination result, you can
weigh down the still hot foil bag with a
book, a file folder or other heavy, smooth
object. This will give it a smooth and flaw-
less surface.
³If you do not want to start another lamination
process, turn the foil thickness switch oto ABS
(OFF) and withdraw the plug from the mains
power socket.
Anti-Blocking Switch (ABS)
At the start of the lamination process, the pouch
may be pulled in at an angle or jam itself inside the
appliance.
³Turn the anti-blocking switch (ABS) oto the
position ABS.
• The laminate pouch is not pulled any further in.
³Remove the laminate pouch.
³Turn the anti-blocking switch (ABS) oback to
the desired foil thickness.
³Re-start the lamination process.
Trimming function
Should you wish to use the trimming function on the
foil guide rails q, dismantle the foil guide rails q.
³If necessary, fold the documents support s
down.
³Adjust the cutter attachment dso that it forms
a straight face with the foil guide rails q.
³Slide the cutting head eto the end stop (the
cutting head ecan be slid to both ends of the
cutting rail w).
³Flap the cutting rail wupwards with the roun-
ded grip and position the document on the foil
guide rails q. Restrain the document by sliding
the foil format restraint rtogether until they
touch both sides of the document.
³Use the markings on the measurement table to
align the document precisely.
³Flap the cutting rail wdownwards so that it
engages.
³Hold the paper in a secure position with your
left hand.
³To trim, press the cutting head edown with
the right hand and then slide it with one pull or
push over the document.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for United office ULG 300 A1 - IAN 273398 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of United office ULG 300 A1 - IAN 273398 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info