585460
10
Zoom out
Zoom in
Previous page
1/20
Next page
English 10
CLOCK & CALENDAR
Press [CLOCK] to toggle display between time,
calendar and day of the week.
Hold [CLOCK] button to enter clock setting mode.
Using [UP] or [DOWN] to adjust and [CLOCK]
to confirm, the following values can be set in
sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D
format > Month > Date > Weather Forecast > EXIT
HOME TIME, WORLD (ZONE) TIME
Hold [ZONE] to enter world (zone) time setting
mode. Press [UP] or [DOWN] to enter the desi-
red hour offset value from –12 to +12 hours
(Switzer-
land +1)
. Press [CLOCK] to confirm and exit.
Press [ZONE] button to toggle between home (ra-
dio-controlled) time and world (zone) time. “ZONE”
icon appears when world (zone) time is selected.
When zone time is not used, set zone time to “0”.
ALARM SETTING
Press [ALARM] to show alarm time and “AL.”
icon will appear. Press again to enable or disable
the alarm. Bell icon “
(I) appears when alarm is
enabled.
Hold [ALARM] to enter alarm time setting mode.
Press [UP] or [DOWN] to enter the desired Hr/
Min values and press [ALARM] to confirm setting.
SNOOZE & BACKLIGHT
When alarm is going off, press [SNOOZE/CHANNEL/
LIGHT] to trigger snooze alarm and “Zz” icon will
appear. To stop alarm for one day, press [ALARM]
key.
Press [SNOOZE/CHANNEL/LIGHT] for an exten-
ded backlight if adapter is not connected.
Press [LIGHT ON/OFF] to turn on or off the back-
light when adapter is connected.
LOW BATTERY INDICATION
Low battery indication (F) is available for the home
unit itself and all of the 3 remote channels. Replace
the batteries and follow the setup procedure in this
instruction manual.
BATTERY DISPOSAL
Replace only with the same or equivalent type
recommended by the manufacturer.
Please disposal of old, defective batteries in an
environmentally friendly manner in accordance with
the relevant legislation.
SPECIFICATIONS
Power supply of main unit: 3 x 1.5V or with 6.0 V power supply
Battery type of main unit: 3 x AAA / LR03 / AM4
Temperature range of main unit: 0 ºC to +50ºC
Humidity range of main unit: 20% to 99% RH
Operating temperature: 0 ºC – 50 ºC
Temperature display resolution: 0.1 ºC
Humidity resolution: 1%
Power supply of remote sensor: 2 x 1.5V
Battery type of remote sensor: 2 x AAA / LR03 / AM4
Temp. Range of remote sensor (W186-F): –20 ºC to +60ºC
Transmission frequency: 433 MHz
Max. range (under opt. conditions): 30m
Number of remote sensors: 3
313508_W193_Manual_130215.indd 10 27.02.13 12:49
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unitec W193-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unitec W193-7 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info