585460

Unitec W193-7 Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
9 English
WEATHER FORECAST
The unit predicts weather condition of the next
12 – 24 hours based on the change of atmospheric
pressure. The coverage area is around 30 – 50
km. The weather forecast is based on atmospheric
pressure change and is about 70 – 75% correct.
As weather conditions cannot be 100% correctly
forecasted, we cannot be responsible for any loss
caused by an incorrect forecast.
To obtain an accurate weather forecast, you need
to input your current weather condition as initial
setting. After the reset of the unit, Press [UP] or
[DOWN] to select the local weather condition as
initial weather forecast setting. Press [CLOCK] to
confirm and exit.
You may also set the weather forecast by holding
[CLOCK] button to enter the setting mode. Press
[CLOCK] repeatedly to skip the clock & calendar
setting until the weather icon flashes. Press [UP]
or [DOWN] to select local weather condition.
Press [CLOCK] to confirm and exit.
12/24hr format > Hr > Min > Yr > D/M or M/D
format > Month > Date > Weather Forecast > EXIT
NOTE
Different geographical location such as inland area
or coastal region has different weather forecasting
response. In case your weather forecast always
show rainy or stormy over a long period of time and
does not reflect the actual weather condition, it is
necessary to follow above setting procedure for fine
tuning the weather forecast’s accuracy
RADIO-CONTROLLED CLOCK
The unit will start synchronizing the clock after bat-
tery/adapter installation or reset. In normal mode,
press [
/UP] until icon (A) appears to enforce
searching of radio-controlled clock signal. If the icon
(A) disappears afterwards, radio time signal is not
available at the moment. Try other locations later.
Place the unit away from source of interference such
as mobile phones, appliances, TV etc.
Antenna icon (A) with full signal strength
will
appear on screen if the reception of radio-controlled
time is successful. The radio-controlled clock will
have a daily synchronization at around 02:03 and
03:03 everyday. Each reception cycle is minimum
2.5 minutes and maximum 10 minutes.
IN/OUT TEMPERATURE & HUMIDITY
Temperature reading (D) is located on the lower left
of the display and humidity (E) is on the lower right.
Press [C/F] button to select temperature unit C/F.
Press [SNOOZE/CHANNEL/LIGHT] button to
select indoor, Ch1, Ch2, Ch3 and auto-channel scrol-
ling
display modes.
COLOR BAR GRAPHS
The color graphs (G) are designed as an intuitive
way to gauge the weather at a glance.
The left color bar graph represents the respective
In/Out temperature of the current display mode.
The right graph represents the respective In/Out
humidity. As the measurements change, the number
of illuminated bars changes automatically.
MAXIMUM / MINIMUM MEMORY
Press [MEM] button repeatedly to view the maxi-
mum & minimum values of temperature & humidity
readings. To clear the memory record, hold [MEM]
button while the respective values are displaying
on screen.
TEMPERATURE & HUMIDITY TREND
INDICATOR
The icons will indicate Rising, Steady, Falling if the
temperature or humidity change is more than 1
degree C (or 2 degree F) within an hour.
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
313508_W193_Manual_130215.indd 9 27.02.13 12:49
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unitec W193-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unitec W193-7 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info