A31003-D3000-M100-02-76A9, 11-2013
OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation 85
Administration
Security
Administration via WBM
System > Security > Access control
Related To pics
Related Topics
• Security
3.4.3 Security Log
A circular security log is used to capture important security specific events. It can
be exported as CSV data to an external application for analysis.
INFO: The security log cannot be disabled.
The Max. lines parameter defines the maximum number of entry lines that can
be kept in the security log before old entries are overwritten by new entries.
Archive to DLS controls whether the log is sent to the DLS. When activated, the
DLS is used to automatically archive the security log so that no log entries will be
lost.
With Archive when at, the trigger for log archiving is set. Automatic archiving of
new security log entries will occur when the percentage of unarchived entries in
the log is as specified or more. When set to disabled, every new entry will trigger
a save (only possible via DLS). The possible values are "10%”, ”20%”, ”30%”,
”35%”, ”40%”, ”45%”, ”50%”, ”55%”, ”60%”, ”65%”, ”70%”, ”80%”, ”90%”.
The security log upload may be accomplished in two ways:
• If "Archive to DLS" is enabled, if the security log reaches the threshold % for
unachieved entries, the phone will initiate an upload.
• If "Archive to DLS" is NOT enabled and the security log reaches the threshold
% for unachieved entries, the phone only sets the "archive-me" flag, it does
not initiate the archive.
It is up to the DLS to recognize the flag and initiate an upload.
Last archived shows the date when the security log was last archived to the DLS.