611012
39
Zoom out
Zoom in
Previous page
1/60
Next page
35
Also instead of pressing E, you can press the VFO control.
When Data Skip is active, your scanner may pause momentarily on an unwanted signal
but will resume searching in 2 or 3 seconds. The Data Skip feature is active as well as
Scan mode. Data Skip does not function during AM/WFM band Scan, Chain Search for
AM/WFM band or Priority Scan.
Frequency Skip
If a particular frequency continues to interrupt search scanning, it is possible to set your
scanner to skip the frequency.
To skip over a frequency, press
L/O when stopping at the frequency you want to skip or
when in Search Hold mode.
Note: You can program up to 200 skip frequencies.
When the 201st skip frequency is programmed, the first frequency is automatically
unlocked.
If all frequencies in the search range are set to skip, a beep sounds and it moves
to Search Hold mode.
To resume searching.
1) Cancel the Frequency Skip by pressing
L/O at the frequencies you want to
resume searching.
––– OR –––
2) Change the Search Frequency range.
To cancel all skipped frequencies, press and hold
L/O for 2 seconds in Search Hold
mode.
Storing Search Frequencies
You can quickly store any frequency you find during Search.
1. Press
/HOLD or LIMIT/ to stop searching, or when the scanner stops on the
frequency you want to store, press
TRNFR.
2. The smallest empty channel number flashes on the display.
If you want to store the frequency to other channel, select
the channel by rotating the
VFO or using or .
3. Press
E.
Note: If the frequency you want to store exists already,
WARNING appears on the display and you will hear a beep. (See Duplicate
Frequency Alert on page 25.)
After storing the frequency, the scanner moves to the Search Hold mode.
If no free channel exists, the frequency you want to store will automatically be
stored in the previous channel before you entered into Chain Search mode.
4. If you want to store other frequencies, resume search by pressing
SRCH or RSM, then
repeat the step 1 to 3.
SRCH 12.5k
1240.0000 NFM
Range 1
C004 0000.0000
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 35
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info