611012
37
Zoom out
Zoom in
Previous page
1/60
Next page
33
Searching
Setting a Search Range
Note: First you must set the search ranges through the Menu screen prior to searching.
The UBC785XLT can search up to 10 separate frequency ranges to help you discover new
stations in your area.
To set a Search Range, enter into the Menu mode.
1. Press
MENU.
2. Select
1:SEARCH OPTION / 2:CHAIN SEARCH / 2:SEARCH RANGE by
rotating the
VFO and pressing E.
3. Select a range number by rotating
VFO and pressing E.
4. Select
1:RANGE by rotating the VFO and pressing E.
Enter the lowest frequency using the keypad and then
press
E. Then repeat the same step for the highest
frequency, then press
SRCH. The scanner starts searching.
If an active search is detected,
SRCH flashes.
––– OR –––
1. Press and hold
SRCH for 2 seconds.
2. Select - range number -
1:RANGE and program the lowest and highest frequencies by
the same way as step 3 and 4 above.
Remember! You can also use or instead of rotating the VFO.
Also instead of pressing
E, you can press the VFO control.
In Search Hold mode, you can change lowest and highest frequencies to the selected
search range.
1. Press
/HOLD.
2. Enter the lowest frequency using the keypad, then press
LIMIT/.
3. Enter the highest frequency using the keypad, then press
LIMIT/.
4. Press
SRCH.
Note: The scanner can continuously search up to 10 ranges. (Chain Search)
You can select or deselect the search range freely by pressing the corresponding
number with the keypad.
The scanner automatically increases its search speed from 100 to 300 steps per
second for the bands having 5 kHz steps. (Turbo Search)
After you have set the search range through the Menu the first time for a range,
you will be able to set new ranges for the same range by using the keypad and the
standard direct entry method.
SRCH 12.5k
1240.0000 FM
Range 1234567890
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 33
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info