647633
8
Zoom out
Zoom in
Previous page
1/16
Next page
The display wiHshow the frequency one digit at atime and then show channel 1.
., ,- -
L
- -
,-0 -C'--- ~- ~- J--I
CHANNEL
2. To program 471.2375 into channel 5:
~ IMANUAL I
00QJO0000 0
(Rounded off to 3 places)
IREVIEW I
The display will show:
"
7
- -,-'-
,
.-
-,- -l---c-~- --=,
CHANNEL
Ifyou attempt toenter a frequency outside the range of the Uniden@BearcafC"
50XL. the display will show an ..E". If this ever happens, simply enter the
correct number. You may omit the decimal point when entering frequencies
in the VHF high band (136-174 MHz) and UHF (406-512 MHz.)
The Uniden@Bearcat'" 50XL has been designed to automatically enter trail-
ing zeros on these bands. On LOW BAND (29-54 MHz). YOU MUST PRESS
THE DECIMAL POINT or an ..E " will appear.
When first turned on after purchase or after batteries have been removed. a
test frequency will be found in each of the channels. When you program your
own frequencies, these test frequencies will beerased until power is completely
lost.
SQUELCH
The squelch function controls the sensitivity of the receiver. It adjusts the level
at which the scan mode will stop to receive a transmission on any frequency.
Rotate the "SQUELCH" control clockwise until you hear background noise
and then turn it back counterclockwise until the noise is silenced. This will set
the scanner to receive any transmission above the level of background noise.
You can adjust the squelch level to pick up more distant signals by turning
it clockwise. or less distant signals by turning it back.
MANUAL CHANNEL SELECTION
If you wish to select a channel manually, press and release the IMANUAL I
keyuntilthatchannelnumberappearsinthedisplay.Youcanalso pressthe
channel number, then the IMANUAL I key to directly access that channel.
8
'--.: --
,,-, .._-----
i
.
\
' r
I !
J'
-~
,=--_.
=-=.=~......-.
---'--
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC50XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC50XL in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info