647682
55
Zoom out
Zoom in
Previous page
1/88
Next page
More user manuals on ManualsBase.com
49
Programming Motorola
Systems
Follow the instructions in this section to program information
for Motorola Type I, II, IIi Hybrid, and APCO 25 Digital
trunking systems.
Using Control Channel Programming
Your scanner has a powerful feature that lets you program in
only the control channels for Motorola 800 and 900 MHz
systems. This can greatly shorten the time it takes to program
system information.
2:SCAN OPTION 2:TRUNK Select the bank
:CNTRL CH ONLY
For 900 MHz systems, you can then simply turn the feature
on or off. For 800 MHz systems, you need to select the band
plan for the system:
1:PLAN1
Use if the last three digits of all of the frequencies
used by the system end in 125, 375, 625, or 875.
2:PLAN2
Use if the highest frequency used by the system is
above 866 MHz and if the last three digits end in 000,
125, 250, 375, 500, 625, 750, or 875.
3:PLAN3
Use if the last three digits of all the frequencies in the
system end in 000, 250, 500, or 750.
4:PLAN4
Use if the highest frequency in the system is below
866 MHz and if the last three digits end in 000, 125,
250, 375, 500, 625, 750, or 875.
5:OFF
Select to turn off control channel programming for this
bank.
Note: Many systems alternate control channels. To prop-
erly track the system, you need to program all alter-
nate control channels.
If you do not know all of the frequencies for a sys-
tem, but know at least one control channel, start by
selecting Plan 1 (the most common type). If you
notice that you seem to be missing transmissions
and replies, try each of the other plans until you
find the one that works best.
BC296D(NEW) 10/16/03 6:35 PM Page 49
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC296D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC296D in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info