52
At Quick Search, press Hold to start searching.
To start a Quick Search at the current frequency during Close
Call Search, turn SCROLL CONTROL in Hold mode and press
Hold to start searching.
When the scanner nds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to
the delay setting.
While searching in Quick Search mode, the upper line
displays Quick Search and the lower line displays the
searching frequency and the direction indicator (↑or ↓) with the
modulation.
If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn SCROLL
CONTROL or press Srch/Svc.
Quick Search Receive/Hold Modes
To hold on a frequency press Hold. To step through the
frequencies, turn SCROLL CONTROL in Hold mode. Press Hold
to resume.
While monitoring a transmission, the upper line displays Quick
Search and the lower line displays the current frequency and
the direction indicator (↑or ↓).
The modulation, Priority mode icon (if Priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC
Pri or CC-DND is enabled) will also appear in the display.
• To store a frequency, press Pgm/E. See Storing Found Search
Frequencies, page 55.
• To temporarily lock out a frequency, press L/O.
