51
Custom Search Receive/Hold Modes
To hold on a frequency, press Hold. To step through the
frequencies, turn SCROLL CONTROL in Hold mode. Press Hold
to resume searching.
While monitoring a transmission, the upper line displays the
current search bank name and the lower line displays the
current frequency with the direction indicator (↑or ↓)
The modulation, Priority mode icon (if priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC
Pri or CC-DND is enabled) will also appear in the display.
Numbers at the bottom of the display show the enabled service
search banks. The currently searched bank number ashes in
Receive mode.
• To store a frequency, press Pgm/E; see Storing Found Search
Frequencies on page 55.
• To temporarily lock out a frequency, press L/O.
• To permanently lock out a frequency, press L/O twice quickly.
See also Search Options on page 53 for Delay, CTCSS/DCS settings,
and locking out/reviewing/unlocking frequencies.
Quick Search Mode
Quick Search mode allows you to enter a frequency and start
searching up or down from that frequency from any Hold mode
(except Close Call Only/Weather Hold).
To start a Quick Search in Scan or Search mode, press Hold
to hold on any channel or frequency. Enter the new frequency
(include a decimal point so you don’t go to a channel) and press
Hold again to set the frequency.