805631
13
Zoom out
Zoom in
Previous page
1/64
Next page
EN-11
pressing the sweep along wall button (C) on the remote control (29).
Fixed-point cleaning mode
In fixed-point cleaning mode, the device will focus on a certain spot. Select this mode by pressing the
fixed-point cleaning button (D) on the remote control (29). The device will start vacuuming in high suction
mode. The device moves with outwards spirals, inwards spirals and stops at the point where it started.
Note! Cleaning modes will be cancelled when pressing the clean button (5) or start/pause button (F).
When the device is started again, it will operate in automatic cleaning mode.
Fixed time mode
In fixed time mode, the device will start 1 hour after being switched on and will continue daily until
disabled. Select this mode, by pressing the fixed time button (E) for ± 3 seconds on the remote control (29),
a beep will sound indicating the mode has been switched on.
For example, if you switch on this mode at 8 am, the device will start vacuuming at 9 am and will continue
to start vacuuming the following days at 9 am too.
This mode can be disabled by pressing the fixed time button (E) for ± 3 seconds or switching OFF the
device manually with the power switch (17).
Note! The device needs to be (and stay) powered on for this mode to work.
Start/pause button
By pressing the start/pause button (F) on the remote control (29), the device will start/pause vacuuming.
When the LED indicator (4) of the device is flashing, the device is paused. When the LED indicator (4) of
the device lights up, the device is operational.
Note! If the device has been paused for ± 2 minutes, the device will go into standby mode.
Direction buttons
By pressing the direction button (G) on the remote control (29), you can control the direction of the device.
Note! The device is not controllable when the fixed-point cleaning mode is activated.
Suction modes
The device has 2 dierent suction modes (low and high). The device always operates in low suction mode
when powered on. To select high suction mode, press the high suction mode button (I). To select low
suction mode, press the low suction mode button (H).
4) LEANING AND MAINTENANCE
Cleaning the dust container
After each vacuum cleaning cycle, clean the device and empty the dust container.
• Press the dust container cover (7) of the device. The dust container (24) will pop up.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Umuzi Cleaning UZ-CL-VCR01-W - Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Umuzi Cleaning UZ-CL-VCR01-W - Robot in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info