805631
10
Zoom out
Zoom in
Previous page
1/64
Next page
EN-8
Note! The device will not operate when it is being (directly) charged with the power adapter.
Note! Once charging has been completed with the power adapter, always disconnect the power adapter
from the electrical outlet and the connector from the charging port (18) of the device.
Charging station
• Place the charging station (19) on a flat surface against
a wall.
• Remove all barriers within 0.5 metre on the left and
right side and 1.5 metres at the front of the charging
station. The charging station charging plates (22) must
be freely accessible. Make sure the power adapter cable
does block the device.
• Carefully plug the connector of the power adapter (30)
into the power inlet (23) of the charging station.
• Carefully plug the power adapter in the electrical outlet.
• The LED indicator (21) of the charging station will light up green.
• To charge the device via the charging station, press the clean button (5) for ± 3 seconds, a beep will
sound. The device will automatically search for the charging station (19). Then the charging plates (9) & (22)
will connect and start charging.
• Note! The device needs to be powered ON and placed near the charging station to be able to find it.
• If the battery is completely empty, you can place the device on the charging station manually.
• The clean button (5) flashes blue and the LED indicator (4) of the device flashes red and green
alternatively when the device is charging.
• Once charging is completed, the LED indicator (4) of the device will light up green and the device will
automatically stop charging.
• Unplug the connector from the charging station and the power adapter from the electrical outlet (23).
• If the battery level is low, the LED indicator (4) of the device will light up red and the suction stops. The
device will roam around to find the charging dock. After ± 25 minutes the device is completely empty.
• If the battery is completely empty, there will be 5 consecutive beeps.
Note! Only use the power adapter and charging station provided to charge the device.
Note! If the device cannot find the charging station, please put the device on the charging station or put
the power adapter directly into the device.
Note! Do not place the charging station near stairs or edges.
Note! If you use the device daily, you can leave the power adapter connected so the device can find the
charging station. If you use the device weekly, remove the power adapter from the electrical outlet.
Power ON/OFF
• Power ON the device, by switching the power switch (17) to the “I” position, a beep will sound. The clean
button (5) flashes blue and the LED indicator (4) of the device flashes green. The device is now paused.
• Power OFF the device, by switching the power switch (17) to the “0” position.
Preparations before use
The best cleaning results are achieved with the following preparations:
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Umuzi Cleaning UZ-CL-VCR01-W - Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Umuzi Cleaning UZ-CL-VCR01-W - Robot in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info