805631
9
Zoom out
Zoom in
Previous page
1/64
Next page
EN-7
Installing the mop
The mop (27) can be attached to the device. The mop can be used to remove dust or light stains.
• Remove the mop (27) with attached velcro strips from the polybag.
• Turn over the device and place it on a soft surface or cloth.
• Remove the protective film from the adhesive edges of the velcro strips.
• Place the mop on the accessories plate (15) on the bottom of the device and press for ± 10 seconds to
secure.
To moisten the mop, pull it from the velcro strips. Rinse under running water and wring the mop out
thoroughly so no water drips out. Place the bottom side of the mop on the velcro strips and it is ready for
use.
Charging the device
The battery can be fully charged in ± 3 hours.
The device can be charged in 2 ways, via the
power adapter (30) or via the
charging station (19).
Power adapter
• Before connecting the power adapter (30) to the electrical outlet, make sure the power switch (17) is in
the “0” position.
• Carefully plug the connector of the power adapter (30) into the charging port (18) of the device, a beep
will sound.
• The clean button (5) flashes blue and the LED indicator (4) of the device flashes red and green
alternatively indicating it is charging.
• Once charging is completed, the LED indicator (4) of the device will light up green and the device will
automatically stop charging.
• Unplug the power adapter from the electrical outlet and the connector from the charging port (18) of the
device, after which the device is ready for use.
• If the battery level is low, the LED indicator (4) of the device will light up red and the suction stops. The
device will roam around to find the charging station, even if it is not plugged in. After ± 25 minutes the
device is completely empty.
• If the battery is completely empty, there will be 5 consecutive beeps.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Umuzi Cleaning UZ-CL-VCR01-W - Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Umuzi Cleaning UZ-CL-VCR01-W - Robot in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info