647786

Ultimate speed UMK 10 B2 - IAN 113044 Mini Compressor Manual

8
Zoom out
Zoom in
Previous page
1/61
Next page
8 GB/IE
Start-up / Operation / Cleaning / Storage / Warranty and service information
General Safety Information / Start-up
- for cleaning or maintenance;
- if the power cable is damaged;
- if foreign objects enter the device or you notice
unusual noise.
Only use accessories supplied and recom-
mended by the manufacturer.
Do not attempt to repair the device yourself.
CAUTION:
How to avoid accidents and
injuries from electric shock:
Electrical safety:
Do not use the device if the switch cannot be
switched on and off. Have a defective switch
replaced.
Do not carry the device by the cable. Do not
unplug from the socket by the cable. Protect the
cable from heat, oil and sharp edges.
Only connect the connection cable to the ciga-
rette lighter socket in the car.
Follow the instructions of your automaker on
using the cigarette lighter socket.
If the cable is damaged, immediately unplug from
the cigarette lighter socket.
The connection cable on this device cannot be
replaced. Dispose of the device if the cable is
damaged.
Start-up
Place the device on a level, non-flam-
mable surface. Never cover the vents.
Do not operate the device in dusty
environments. Doing so poses a fire
hazard and could damage the device.
For inflatables with counterpressure (e.g. partly
filled car tyre): Switch on the device before con-
necting the car valve
7
to the tyre.
Note: Depending on the inflatable you can use the
connection valve
7
directly or along with the inc
luded
valve adapters
10
(see Fig. A).
Connecting to the cigarette lighter socket:
Note: Verify the socket of the cigarette lighter in your
vehicle has an adequately sized fuse.
Verify the device is switched off: on / off switch
6
to position “0“.
Plug the cigarette lighter plug
5
into the socket
of the 12 V cigarette lighter.
Connecting the connection valve
7
:
Open the connection valve
7
: tensioning
lever
8
vertical (Position 1, see Fig. B).
Connecting without valve adapter
10
:
- Insert the open connection valve
7
into the
valve of the inflatable (if necessary, first re-
move valve cover of the inflatable).
- Hold the connection valve and close: push
tensioning lever
8
toward connection valve
(position 2, see Fig. C).
Connecting with valve adapter
10
:
- Push the respective valve adapter into the open-
ing in the connection valve
7
.
- Secure the valve adapter into the connection
valve
7
: push tensioning lever
8
toward
connection valve (Position 2).
- Insert the valve adapter into the valve on the
inflatable (if necessary, first remove valve cover
of the inflatable).
Switching on / off:
Switch the device on: on / off switch
6
to
position “I“.
Once the desired filling pressure has been
reached, switch the device off: on / off switch
6
to position “0“.
Remove the cigarette lighter plug
5
.
Removing the connetion valve:
Connecting without valve adapter
10
: Open
the tensioning lever
8
for the connection lever
7
and remove from the valve of the inflatable.
Connecting with valve adapter
10
:
Remove the valve adapter from the valve of the
inflatable. Open the tensioning lever
8
of the
connection valve
7
and remove the valve
adapter.
113044_uls_Mini-Kompressor UMK 10 B2_Content_FI_SE_DK_BE_NL.indd 8 11.06.15 16:55
… 8 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ultimate-speed-umk-10-b2---ian-113044-mini-compressor

Reset search

  • Hi, where can i get a spst replacement switch for my mini compressor UMK 10.B2. The switch broke after a couple of times in use.. I contacted service department as specified in manual, but feed back left much to be desired. Submitted on 21-9-2020 at 14:48

    Reply Report abuse

  • My Ultimate Speed mini compressor UMK 10 B2 switch is jammed it is still under warranty. Please forward me details for a replacement or repair. Submitted on 23-3-2017 at 13:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed UMK 10 B2 - IAN 113044 Mini Compressor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed UMK 10 B2 - IAN 113044 Mini Compressor in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info