576656
6
Zoom out
Zoom in
Previous page
1/59
Next page
3
ULGD 3.8 A1
GB
IE
Do not use the charger for charging non-
rechargeable batteries.
Do not use the charger for charging lithium-ion
batteries.
Place the removed battery in a well-ventilated
location during char
ging.
The automatic mode of oper
ation and usage
restrictions are e
xplained below in these operat-
ing instructions.
DANGER OF ELECTRIC SHOCK!
Do not operate the appliance with a damaged
cable, supply cord or mains plug. A damaged
pow
er cord causes danger to life by electric shock.
If the supply cord is damaged, it must be replaced
by the manufacturer
, its service agent or similarly
qualifi ed persons in order to avoid a hazard.
Before connecting to the power, ensure that the
power connection is earthed, is 230 V ∼ 50 Hz,
and is 16 A fused and equipped with an RCCB
switch (residual current circuit breaker) in
accordance with the current regulations!
Disconnect the charger from the grid, before you
make or break connections to the batter
y.
First, connect the clamp that is not connected to
the bodywork. Then connect the other clamp to
the bodywork, away from battery and fuel pipe.
Only after this, connect the charger to the grid.
After charging, disconnect the charger from the
grid. Only after this remove the clamp from the
bodywork. Following this, remove the clamp from
the battery.
DANGER OF EXPLOSION
AND FIRE HAZARD!
Protect yourself from a highly explosive hydrogen-
oxygen reaction!
Ensure that during charge and charge retention
procedures, ther
e are no naked lights (fl ames,
cinders or sparks)!
Ensure that the plus cable does not come into
contact with fuel lines (e.g. petrol pipe)!
Ensur
e that there is no possibility of ignition of ex-
plosive or fl
ammable substances, such as petrol
or solvents, while using charger!
Ensure that there is adequate ventilation during
charging.
DANGER OF CHEMICAL BURNS!
Wear protective glasses! Wear protective gloves!
If eyes or skin has come into contact with batter
y
acid, rinse the aff ected body region off with a
large amount of clean water and consult a doc-
tor straight away!
Avoid causing a short circuit when connecting
the charger to the battery
. Connect the negative
pole connector cable only to the negative bat-
tery or to the body work. Connect the positive
pole connector cable only to the plus pole of
the battery!
Do not place the charger close to fi re, heat or
to places with long-term exposure to tempera-
tures over 50 °C!
Ensure that no fuel lines,electric cables, hydrau-
lic or water pipes are damaged by the screws
during assembly of the charger!
Do not cover the charger with any objects!
Protect the electrical contact surfaces of the bat-
tery from shor
t circuiting!
Only use the charger for charging and for
charge re
tention of 6 V / 12 V lead batteries.
Do not charge frozen batteries.
IB_102626_ULGD3.8A1_FI_SE_DK_BE_NL.indb 3 06.08.14 08:48
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed ULGD 3.8 A1 - IAN 102626 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULGD 3.8 A1 - IAN 102626 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info