Manual Ultimate speed ULG 3.8 B1 - IAN 274400 (page 8 of 62) (English, German, Dutch, French)

647784

Zoom out

Zoom in

1/62

│

5 ■

ULG 3.8 B1

■ Use the charger exclusively for

charging or trickle charging undam-

aged 6V/12V lead batteries!

Frozen batteries may not be charged.

Operation

Before use

♦ Before connecting the battery charger, read the

operating instructions of the battery thoroughly.

♦ In addition, observe the vehicle manufacturer's

instructions for a permanently connected battery.

Secure the vehicle; turn oﬀ the ignition.

♦ Clean the battery terminals. Ensure that your

eyes do not come in contact with the dirt in the

process.

♦ Ensure suﬃcient ventilation.

Connecting

NOTE

► There are two options for connecting the

charger. Connect the negative terminal

connecting cable (black) either directly to

the negative terminal of the battery or to the

chassis. Please also bear in mind the vehicle

manufacturer's instructions.

♦ Before starting the charging or trickle charging

procedure on a permanently installed battery in

a vehicle, ﬁrst disconnect the negative terminal

connecting cable (black) of the vehicle from the

negative terminal of the battery. The negative

terminal of the battery is usually connected to

the vehicle's chassis.

♦ Then disconnect the positive terminal connecting

cable (red) of the vehicle from the positive termi-

nal of the battery.

♦ Clamp the positive terminal clamp (red)

of the

charger to the positive terminal on the battery.

♦ Clamp the negative terminal clamp (black)

of the charger to the negative terminal on the

battery.

♦ Connect the mains cable

of the battery

charger to the power socket.

♦ If the terminal clamps are connected incorrectly,

the LED display "ERROR"

will light up.

Disconnecting

♦ Disconnect the appliance from the power supply.

♦ Remove the negative terminal clamp (black)

of the charger from the negative terminal on the

battery or from the chassis.

♦ Remove the positive terminal clamp (red)

the charger from the positive terminal on the

battery.

Select charging mode

You can choose between diﬀerent charging modes

for charging various batteries at diﬀerent ambient

temperatures. Unlike standard battery chargers,

this appliance has a special function for reusing an

empty rechargeable battery. You can recharge a

completely discharged battery. A protection func-

tion against incorrect connection and short circuit-

ing ensures safe charging. Due to the installed

electronics, the charger does not begin operation

directly after connecting the battery, but only starts

after a charging mode has been selected. This pre-

vents sparking, which often occurs when connect-

ing. In addition, the battery charger is controlled by

an internal MCU (microcomputer unit).

Reset/deleting settings

♦ After connection to the power supply, the appli-

ance automatically returns to its initial state and

remains in Standby mode

Switching between modes 1, 2, 3

and 4

Press the MODE selection button a corresponding

amount of times.

The appliance switches through the modes in the

following order: Standby ( ), Mode 1 ( ), Mode

2 (

), Mode 3 ( ), Mode 4 ( ) and then starts

the next cycle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 3.8 B1 - IAN 274400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed ULG 3.8 B1 - IAN 274400

Ultimate speed ULG 3.8 B1 - IAN 274400 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 74 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ultimate speed ULG 3.8 B1 - IAN 274400 Manual

Product: