647784
7
Zoom out
Zoom in
Previous page
1/62
Next page
4 
GB
IE
CY
ULG 3.8 B1
The negative pole terminal clamp
(black)
must be connected to
the chassis at a distance of at least
10 cm from the battery and the
fuel line.
Now connect the charger to the
power supply.
Disconnect the charger from the
mains power supply after charg-
ing. Only then remove the terminal
clamp from the chassis. Then re-
move the terminal clamp from the
chassis.
RISK OF EXPLOSION AND FIRE!
Protect yourself from a highly explosive
oxyhydrogen gas reaction!
Make sure that there are no sources
of open fire (flames, embers or
sparks) in the vicinity when charg-
ing or discharging batteries!
Make sure that the positive terminal
connecting cable has no contact
with a fuel line (e.g. petrol line)!
Make sure that no explosive and
flammable substances, e.g. petrol
or solvents, can be ignited when
using the charger!
Ensure that there is adequate venti-
lation during charging.
RISK OF CHEMICAL BURNS!
Wear safety goggles! Wear pro-
tective gloves! If your eyes or skin
come into contact with battery acid,
rinse the affected part of the body
with plenty of clear running water
and seek immediate medical assis-
tance!
Avoid an electric short-circuit when
connecting the charger to the bat-
tery. Connect the negative terminal
connecting cable only to the nega-
tive terminal of the battery or to the
coachwork. Connect the positive
terminal connecting cable only to
the positive terminal of the battery!
Do not set up the charger near a
fire or subject it to heat or tempera-
tures exceeding 50°C for long
periods of time!
When attaching the charger, be
sure not to damage any lines for
fuel, electricity, braking system,
hydraulics or water with screws!
Do not cover the charger with
objects of any kind!
Protect the electrical contacts of the
battery against short-circuiting!
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed ULG 3.8 B1 - IAN 274400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 3.8 B1 - IAN 274400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed ULG 3.8 B1 - IAN 274400

Ultimate speed ULG 3.8 B1 - IAN 274400 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info