Manual Ultimate speed ULG 3.8 A1 - IAN 74189 (page 30 of 34) (Dutch)

589311

Zoom out

Zoom in

1/34

30 GB

Operation / Maintenance and care / ServiceOperation

This avoids sparking, which often occurs when

connecting. The battery charger is controlled by an

internal MCU (Micro-Computer Unit).

Reset / deleting settings

After connection to the power supply, the appliance

automatically returns to its basic setting and remains

in STANDBY mode

Switching between modes 1,

2, 3 and 4

Press the MODE selection button

the appro-

priate number of times.

The device switches between charging modes in

the following order: Standby

, MODE 1

„6 V“, MODE 2

, MODE 3 , MODE 4

and then repeats the cycle

NOTE: If a 12 V battery is connected, MODE 1 “6 V”

cannot be selected. If a 6 V battery is connected,

MODES 2, 3 and 4 “12 V” cannot be selected.

NOTE: If you press the selector button

, charging

mode automatically switches over to the next mode

and begins operation in that mode.

NOTE: However, if a battery is not disconnected

from the charging station after a full charge, the

appliance remains in trickle-charge mode, even if

the user switches over to another mode. This pro-

tects the battery from being damaged.

Mode 1 „6 V“ (7.3 V / 0.8 A)

This mode is suitable for charging 6 V lead-acid

batteries with a capacity less than 14 Ah.

Press the selection button MODE

, to select

mode 1. After doing so, the corresponding LED

display „6 V“

lights up. If you do not activate

an-other process afterwards, the electronic sys-

tem will automatically start the charging process

together with the LED display

at (with a

current of) 0.8 A ± 10 %. If the procedure runs

without any problems, the LED display

remains on during the entire charging proc

ess,

un-

til the battery is fully charged at 7.3 V / ±

0.25 V.

When the battery is fully charged, LED display

lights up and LED display

goes

out. The device now switches automatically into

maintenance charging mode.

Mode 2 „12 V“ (14.4 V / 0.8 A)

This mode is suitable for charging 12 V lead-acid

batteries with a capacity less than 14 Ah.

Press the selection button MODE

, to activate

mode 2. After completion of this process, the

appropriate LED indicator

lights up.

Then if you do not take any further action, the

electronic control and the LED indicator

automatically switches on and starts the charg-

ing process. If the procedure runs without any

problems, the LED display

remains on

during the entire charging process, until the

battery is fully charged. When the battery is

fully charged, LED display

lights up and

LED display

goes out. The device now

switches automatically into maintenance charg-

ing mode.

Mode 3 „12 V“ (14.4 V / 3.8 A)

This mode is mainly suitable for charging 12 V

lead-acid batteries with a capacity greater than

14 Ah under normal conditions.

Press the selection button MODE

, to activate

mode 3. Then if you do not take any further ac-

tion, the electronic control and the LED indicator

switches on and starts the charging pro-

cess. If the process runs without any problems,

the LED indicator

remains on during the

whole charging process until the battery is

charged. When the battery is fully charged, the

LED indicator

and the die LED indicator

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 3.8 A1 - IAN 74189 in the language / languages: Dutch as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed ULG 3.8 A1 - IAN 74189

Ultimate speed ULG 3.8 A1 - IAN 74189 User Manual - English, German - 24 pages

Ultimate speed ULG 3.8 A1 - IAN 74189 User Manual - French - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ultimate speed ULG 3.8 A1 - IAN 74189 Manual

Product: