Manual Ultimate speed ULG 3.8 A1 - IAN 74189 (page 29 of 34) (Dutch)

589311

Zoom out

Zoom in

1/34

29 GB

Safety / OperationSafety

nance in the operating instuctions of the vehicle!

Otherwise personal injury and / or damage to

the device could occur.

Unplug the charger from the mains supply when

not being used! This also beneﬁts the environment.

Consider how much electricity is consumed,

even in standby mode.

Remain alert at all times and always watch what

you are doing. Always proceed with caution

and do not use the battery charger if you can-

not concentrate or feel unwell.

Product features

This appliance has been designed for charging a

variety of SLA batteries (sealed lead acid batteries),

as mainly used in cars, motorbikes and several other

vehicles. They may be of types e.g. WET (with liquid

electrolyte), GEL (with mit gel-type electolyte) or AGM

(absorbed glass mat) batteries. A special design of

the appliance (also named „three-phase-charging

strategy“) enables the recharging of the batttery to

almost 100 % of its original capacity. Connecting

the battery for a long period to the battery charger

is also a good way of ensuring that your battery is

kept in optimum condition.

Operation

Before you carry out any work

on the battery charger always pull the mains

plug out of the mains socket.

DANGER OF ELECTRIC

SHOCK! DANGER OF DAMAGE TO

PROPERTY! DANGER OF INJURY! Ensure

that you do not strike electrical cables, gas or

water pipes when you are drilling into the wall.

If necessary, check the wall using a suitable

detector before you drill.

You may ﬁnd it convenient to attach the battery

charger on to a board or a wall. Screw the two

screws through the mounting holes

into the

board or wall.

Connection

Before starting the charging or discharging

procedure on a permanently installed battery

in a vehicle, ﬁrst disconnect the minus pole con-

necting cable (black) of the vehicle from the

minus pole of the battery. The minus pole of the

battery is usually connected to the car body.

Then disconect the plus pole connecting cable

(red) of the vehicle from the plus pole of the

battery.

First attach the „+“ quick-release clamp (red)

of the battery charger to the „+“ terminal of the

battery (see Fig. C).

Attach the „–“ quick-release clamp (black)

of the battery charger to the „–“ terminal of

the battery (see Fig. C).

Connect the mains lead

of the battery

charger to an electrical power outlet socket.

Disconnecting

Disconnect the appliance from the power supply.

Detach the „–“ quick-release clamp (black)

from the „–“ terminal of the battery.

Detach the „+“ quick-release clamp (red)

from the „+“ terminal of the battery.

Reconnect the plus pole connecting cable of

the vehicle to the plus pole of the battery.

Reconnect the minus pole connecting cable of

the vehicle to the minus pole of the battery.

Select charging mode

You can select diﬀerent charging modes for charging

diﬀerent batteries at diﬀerent ambient temperatures.

In comparison with conventional battery charging

stations, this appliance has a special function for

reusing an empty battery or rechargeable battery.

You can recharge an empty battery / rechargeable

battery. Safe charging is ensured by means of a

protection function against incorrect connection and

short circuiting. Due to the installed electronics, the

charging station does not begin operation directly

after connecting the battery, but only starts after a

charging mode has been selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 3.8 A1 - IAN 74189 in the language / languages: Dutch as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed ULG 3.8 A1 - IAN 74189

Ultimate speed ULG 3.8 A1 - IAN 74189 User Manual - English, German - 24 pages

Ultimate speed ULG 3.8 A1 - IAN 74189 User Manual - French - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ultimate speed ULG 3.8 A1 - IAN 74189 Manual

Product: