606437

Ultimate speed ULG 12 A1 - IAN 100683 Manual

38
Zoom out
Zoom in
Previous page
1/44
Next page
38 GB
Safety notices / Operation
EXPLOSION HAZARD! Ensure
the positive terminal connection cable
does not come into contact with fuel
lines (e.g. petrol pipe)!
DANGER OF CHEMICAL BURNS! Protect
your eyes and skin against corrosion from acids
(sulphuric acid) when coming into contact with
the battery!
Use acid-proof goggles, clothing and gloves! If
eyes or skin has come into contact with sulphuric
acid, rinse the affected body region off with a
plenty of clean water and consult a doctor str
aight
away!
Avoid electric short-circuits when connecting the
car charger to the battery. Only connect the neg-
ative terminal connection cable to the negative
battery terminal or the car body. Only connect
the positive terminal connection cable to the
positive battery terminal!
Before connecting to the mains, verify the mains
power has the required 230 V∼ 50 Hz, neutral
lead, a 16 A fuse and an ELCB switch (earth
leakage circuit breaker)! Ignoring this advice
may damage the device.
Do not place the charger close to fire, heat and
prolonged temperatures over 50 °C! The output
power of the car charger automatically drops
In higher temperatures.
Ensure no fuel lines, electric cables, hydraulic-,
water pipes are damaged by the screws whilst
assembling the charger! Otherwise there is a
risk of death or injuries!
Only use the car charger with the included orig-
inal parts!
Do not cover the car charger with objects! Ignor-
ing this advice may damage the device.
Protect the surfaces of the battery‘s electrical
contacts from short circuiting!
Only use the car charger for charging and main-
tenance charging undamaged 6 V- / 12 V lead-
acid batteries (with electrolyte solution or gel)!
Otherwise material damage could occur.
Do not use the car charger for charging or trickle
charging non-rechargeable batteries. Otherwise
material damage could occur.
D not use the car charger to charge or trickle
charge a damaged or frozen battery! Otherwise
material damage could occur.
Before connecting the charger, refer to the bat-
tery‘s original operating instructions for battery
maintenance information! Otherwise there is a
risk of injury and / or damaging the device.
Before connecting the charger to a battery per-
manently connected to a vehicle, refer to the
vehicle‘s operating instructions for information
about maintaining electrical safety and mainte-
nance! Otherwise there is a risk of injury and /
or property damage.
Also disconnect the car charger from the mains
when not in use for environmental reasons! Re-
member standby operation also consumes elec-
tricity.
Always be alert and always be careful what you
do. Always proceed with caution and do not
operate the car charger when unfocused or feel
unwell.
Operation
Remove the mains plug from the mains socket before
performing any work on the car charger.
RISK OF ELECTRIC SHOCK!
DANGER OF DAMAGE TO PROPERTY!
RISK OF INJURY!
Product properties
This device is designed to charge a variety of SLA
batteries (sealed lead-acid batteries) primarily used
in cars, motorcycles and some other vehicles. These
can be e.g. WET- (with liquid electrolyte), GEL- (with
gelified electrolyte) or AGM batteries (with electrolyte
absorbent glass mat). The special design of the device
(also referred to as “three-level charging strategy“)
allows the battery to be charged to nearly 100 %
of
its capacity. The charger can further be connected
to the battery for extended periods to keep it in op-
timal condition.
Connecting
Before charging and trickle charging a battery
permanently connected to the vehicle, first dis-
Operation
100683_uls_Kfz-Ladegeraet mit Starthilfefunktion ULG 12 A1_content_CH.indd 38 19.09.14 15:13
… 38 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ultimate-speed-ulg-12-a1---ian-100683

Reset search

  • I need a part for a parkside gasless welder IAN 291492 can you please Help phone No 07980041407 . email
    john.hutchings73@ntlworld.com
    Thanks
    John Hutchings Submitted on 5-7-2021 at 17:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed ULG 12 A1 - IAN 100683 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 12 A1 - IAN 100683 in the language / languages: French, Italian as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed ULG 12 A1 - IAN 100683

Ultimate speed ULG 12 A1 - IAN 100683 User Manual - English, German, Dutch, Swedish - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info