698957
3
Zoom out
Zoom in
Previous page
1/10
Next page
3
Information
• Keep this manual so that it is accessible to professionals and future needs.
• Read this manual carefully before starting up the furnace.
• The efficiency of the furnace is calculated after the maximum amount pellets that can be fed and combusted
in the burner during 1 hour (intended for combustion of normal wood pellets as an average of the fuel
specification).
• Follow the manual and its instructions carefully to do recommended management and maintenance.
Registration to the local building authority in your municipality
N.B.: At every change of heating system, the local building authority of the municipality has to be
contacted and a so called “Construction Registration” is made.
Inspection
Heating plants installed today shall be inspected and approved by authorized inspector like the local
certified chimney-sweeper. The local building authority in the municipality can inform you how this
could work.
Important at installation
• Installation shall be made by certified ventilation and sanitation engineer and electrician.
•. N.B.! The burner shall be inserted to maximum in the furnace. Control this carefully in the future
also if the burner is disconnected for example cleaning and service.
• At adjustment of the burner draw limiter shall be adjusted after the draft condition of the chimney. .
• The furnace shall be connected electrically via an all-pole breaker with at least 3 mm length of
break. .
Sweeping
Chimney sweeping made in accordance with the fire-protection law shall be made frequently during
the year. This is made by your local chimney sweeper. Regular cleaning of heating surface of the
furnace shall be made in a way so that good operating economy is obtained. Prepare sweeping by
turning off the burner at least a couple of hours before cleaning to minimize the amount of ignited ash.
Warning!
See to that the power to the furnace is turned off before the cap over the burner is removed and
dismount cabling to the burner when the burner is removed from the furnace.
Maintenance agreement increases operation length and life of the unit
ULMA AB recommends subscription of annual maintenance agreement.
For more information contact your local ULMA retailer.
Change of wear parts
ULMA AB always recommends that wear parts, when needed, are being changed by an authorized
service technician at your ULMA retailer. ULMA’s retailers can provide necessary spare parts and at
change make sure that the part being changed on the unit go through alignment and that a flue-gas
analysis of the unit is made.
Function & description
ULMA FURNACE
Belongs to a new generation of pellet furnace that is specially built only for pellet combustion which means that it
has a standing convection system and special design of the hearth to catch the smallest soot particles on the
convection surfaces and longest possible flue-gas way to increase the efficiency.
Sweeping
Regular cleaning of heating surfaces is made from the top by taking off the lid placed in the center on the top of
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ulma FURNACE 20kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ulma FURNACE 20kW in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info