694450
4
Zoom out
Zoom in
Previous page
1/34
Next page
4
Description
Ulma Eco 40 kW is intended to be mounted on a boiler and shall be fueled with 6-8mm wood pellets. The
enclosed conveyor feeds the fuel from a separate storage. The integrated steering controls the burner via the
temperature giver that starts and stops the burner automatically. The burner is provided with a system that
controls the supervision and controls the combustion. The burner is ignited with help of a hot-air heater when
the boiler temperature goes below the pre-set thermostat setting. The start procedure is fully automatic in
several steps to get a fast and almost smoke free ignition. To then stop completely when set max
temperature has been reached. After a short cooling phase the burner stops and re-starts when the
thermostat calls for more heat.
Construction
The construction and choice of material are made with a long life time in mind. The firing zone of the burner is
made of stainless, acid proof and high temperature constantly steel. The burner is an overflow fed kind of
burner.
Safety functions
Ulma Basic fulfills all existing safety requirements and norms according to the Swedish National Housing
Board. The burner is equipped with several, of each other independent, safety functions.
The overheating protection on the tipping chute that turns off the burner when the temperature goes
over 90°.
The flame guard that has the supervision of the flame.
The fall shaft that prevents contact between pellets and combustion.
A third safety detail is the plastic feed hose between feed auger and burner. The hose melts off at too
high temperature and thereby cuts off the pellet feeding to the burner.
A fourth safety feature is the internal blocking feeder
Unpacking
At unpacking of the burner, make sure that all parts on the list below are there:
Pellet burner
Kit with mounting set
Manual
Fall hose with hose adapter
Metal inlet
Spiral
Screw engine
T-pipe
Compressor
Airhose
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ulma 40 Kw at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ulma 40 Kw in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ulma 40 Kw

Ulma 40 Kw User Manual - Dutch - 10 pages

Ulma 40 Kw User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info