541076
10
Zoom out
Zoom in
Previous page
1/23
Next page
15 16
1. With the headset powered on, place the XP500 in Wired Mode
by quickly pressing the power button twice. The headset will
announce which mode its in.
2. Insert the right angle plug into the headphone jack on the
Xbox 360 controller.
3. Insert straight plug into the controller jack on the left ear cup
of the headset.
In cases where the XBA Bluetooth Chat Adapter cannot be used,
such as with third-party controllers and the Xbox Chat Pad, and
optional talkback cable is available for a wired chat connection
between the headset and controller.
*The Xbox 360 Talkback Cable is required for this setup and is sold separately at www.TurtleBeach.com.
Current Setting
Dolby Digital
Choose the digital output
type for your system.
This setting only applies
to optical digital and HDMI
audio outputs.
Digital Stereo
Select Back
Digital Output
Dolby Digital 5.1
Dolby Digital 5.1 with WMA Pro
1. In the Xbox 360 System Settings, select:
Settings > Audio > Accessory Settings > Audio Device Settings
Set the “Digital Output” to “Dolby Digital 5.1”
2. In the Xbox 360 System Settings, select:
Settings > Preferences > Voice
Set the “Voice/Game Volume” to 10 and set the
“Voice Output” to “Play Through Headset”
Audio Device Settings
Microphone Level 3
Input Device TURTLE BEACH XP500
Output Device TURTLE BEACH XP500
Back
X Enter
OK
1. Place the XP500 in Wireless Chat Mode mode by quickly pressing the power
button twice.
2. In the PS3 Menu, select “Settings” > “Sound Settings> “Audio Output Settings” >
Optical Digital > Dolby Digital 5.1
3. In the PS3 Menu, select “Settings” > “Accessory Settings” > “Audio Device Set-
tings” > set the Input” and “Output to “TURTLE BEACH XP500”
12/14 12:15 PM
0
Register to manage Bluetooth® devices such as
headsets, keyboards and mouse devices.
R
Re
Re
eg
eg
is
is
st
er
to
ste
ste
o
er to
er
o
to
m
mana
ma
an
a
a
age
n
a
ag
a
e
ge
g
e B
e B
e B
B
B
uet
o
u
Bl
ue
l
Bl
et
e
oot
o
ooth
o
h
oth
®
®
®
®
®
®
® d
® d
®
d
dev
ic
dev
de
1. With the XP500 Bluetooth powered OFF, go in the PS3 Menu and
select “Settings” > “Accessory Settings” > “Manage Bluetooth
Devices
2. If you have never used a Bluetooth device or have deleted any
profiles from other devices previously used with your console,
the PS3 prompt will ask if you wish to register a device. Choose
“Yes” to start scanning. If any other Bluetooth devices have
previously been paired with your console they will appear in a
list. Choose “Start Scanning” at the bottom of the screen.
3. On the XP500, press and hold the BT MFB for 5 seconds until the
flashing LED changes from blue to red then release the button.
A voice prompt in the earpiece will indicate that the XP500 is in
pairing mode.
4. When the PS3 is finished scanning, it will prompt you to select
the Bluetooth device. Select TURTLE BEACH XP500” from the list.
5. Enter “0000” as the Pass Key and select “OK”. A voice prompt
in the earpiece will indicate that the XP500 is now paired with
your PS3.
When using the XP500 with a PS3, the Bluetooth is used for PSN
chat. Follow these instructions to pair the Bluetooth.
Xbox 360
®
Wired Chat Setup* (optional)
Configure Xbox 360 Settings
PS3
TM
Chat Setup
Configure PS3 System Settings
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turtle Beach Earforce XP500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turtle Beach Earforce XP500 in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Turtle Beach Earforce XP500

Turtle Beach Earforce XP500 Quick start guide - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info