541076
8
Zoom out
Zoom in
Previous page
1/23
Next page
11 12
The headset and transmitter in this package are “paired”, which means they’re synchronized to ensure they work together. When the
headset and transmitter are communicating, the top LED on the front panel of the transmitter will be on solid. If this LED is instead slowly
pulsing, it means the transmitter can’t communicate with the headset. This could happen if the headset is turned off or out of range. If the
LED is slowly pulsing when the headset is on and within range, then they might need to be “paired” as described below:
1
2
3
Step 1:
Make sure the headset is off by pressing the “Power”
button until the LED turns solid, and then release it when
the LED turns off.
Step 2:
Then press and hold the headset power button until the
LED turns solid and release when the LED begins to flash
rapidly. A voice prompt will announce "pairing headset."
Step 3:
Press and hold the transmitter “Bypass” button for 5
seconds until the topmost LED on the transmitter turns off,
then release the button. The transmitter LED will then flash
rapidly and a voice prompt will announce "headest paired."
After a few seconds, the topmost transmitter LED should be on solid and the headset LED should be flashing about once per second,
indicating that the units are paired.
Interference from Two Headsets
Only one headset can be paired with the transmitter. If you pair two headsets with the same transmitter, they’ll interfere with each other as
they compete for the transmitter RF signal. This will cause one headset to shut off. So don’t try to pair two headsets with the same transmitter!
1. Connect the Digital Optical Cable
NOTE: Remove the protective caps from each
end of the optical cable before inserting it
into the sockets.
2. Connect the Transmitter Power
1
2
Xbox 360
®
(Slim), PS3
TM
Xbox 360 (Original)*
1. Connect the Digital Optical Cable
(Requires Xbox 360 Audio Adapter, sold separately)
NOTE: Remove the protective caps from each end of the optical
cable before inserting it into the sockets.
2. Connect the Transmitter Power
1
2
* Xbox 360 HDMI Audio Adapter cable required (sold separately). If your HDTV
has an optical AUDIO OUT jack, you can use it to connect the optical cable
to the transmitter.
Pairing the XP500 and Transmitter Setup
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turtle Beach Earforce XP500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turtle Beach Earforce XP500 in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Turtle Beach Earforce XP500

Turtle Beach Earforce XP500 Quick start guide - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info