2. Pull the filter towards the side with the control panel to the maximum and fix it in the
frontal channel specially provided for it. See image
3. Align the filter at the level of the fixing channel positioned above the grease collector and
push it until it is firmly fixed. See image
4. Complete the assembly with the second grease baffle filter. See image
5b
5c
5d
5.7 Exhaust size (mm)
See image 6
Position and secure on the hood connection. See image
5.8 Installation of the non-return valve
7
5.9 Connection to the air exhaust system
1. Attach the air exhaust tube (accessory not included) to the hood connection. See image
2. Seal the joints.
8
Fix the reduction with the diameter of 150 mm on the connection of the hood. 1.
See image
2. Fix the 120 mm diameter exhaust pipe on the reducer. See image
3. Seal the joints.
5.10 Installation of the air adapter (reduction).
9b
9a
5.11 Carbon filter kit (code: TCF1) for operation in air recirculation mode
In the air recirculation mode, carbon filters capture substances with unpleasant odors. By
regularly replacing the carbon filters, a high degree of elimination of unpleasant odors is
ensured. Carbon odor filters cannot be cleaned or regenerated.
5.12 Fitting the carbon filter kit TCF1 - optional
Turn off the unit.
Remove the grease baffle filters.
Position the TCF1 carbon filters in the unit to the left and right of the motor.
1.
2.
3.
See image 10a
4. Correctly align the filter with the mounting system mounted on the motor and attach it.
See image 10b
5. Turn clockwise for a firm fit, each filter separately. See image 10c
6. After mounting both TCF1 filters, mount the baffle grease filters.
5.13 Removing the carbon filter kit TCF1
Turn off the unit.
Remove the grease baffle filters
Turn counterclockwise each individual TCF1 filter and pull to the side of the motor.
1.
2.
3.
See image 11a
4. Turn counterclockwise each individual TCF1 filter and pull to the side of the engine.
See image 11b
5. Remove the TCF1 carbon filters from the unit. See image 11c
5.14 Connection to the air recirculation system
Mount the carbon filters for odors (code: TCF1) - optional accessory
Attach the air exhaust tube to the hood connection (optional accessory)
Make the connection to the hole in the built-in furniture.
Fix the exhaust grille to the built-in furniture in such a way that its connection fits into the
1.
2.
3.
4.
EN
19
