484596

Trumatic S 3004 Manual

10
Zoom out
Zoom in
Previous page
1/48
Next page
10
S 3004 / S 3004 P heating system
e
abcd
if gh
a = Control knob (thermostat)
b = Piezo push ignitor (S 3004 P)
c = Blind cover
d = Integrated control panel for a Truma fan TEB-3
e = Sensor button to switch on the lighting (optional)
f = Automatic ignition device with battery compartment
(S 3004)
g = Mica window to observe the flame
h = Thermostat sensor
i = Type plate (remove cover!)
The illustration shows installation on the right. For instal-
lation on the left, the parts are arranged on the other side
(mirror-image).
S 5004 heating system
i
fg
h
e
abcd
a = Control knob (thermostat)
b = Integrated control panel for a Truma fan TEB-3
c = Integrated control panel for second Truma fan TEB-3
d = Blind cover
e = Sensor button to switch on the lighting (optional)
f = Automatic ignition device with battery compartment
g = Mica window to observe the flame
h = Thermostat sensor
i = Type plate (remove cover!)
The illustration shows installation on the right. For instal-
lation on the left, the parts are arranged on the other side
(mirror-image). One or two fans can be mounted. A special in-
stallation box can be supplied for the installation of two fans.
Operating instructions
Taking into operation
S 3004 P with Piezo push ignitor
1. Open gas cylinder and quick-acting valve in the gas supply
line.
2. Turn the control knob (a) into thermostat position 1 – 5 and
push down far as possible. Press the ignitors in quick succes-
sion at the same time until the flame burns.
0
1
2
3
4
5
5
4
3
2
1
O
a
b
3. Hold down the control knob (a) for up to 10 seconds so that
the safety pilot responds.
4. Watch another 10 seconds through the mica window
whether the flame is extinguished by the air in the line
(caused by gas cylinder change).
Never re-ignite before waiting another 3 minutes
otherwise there is the danger of deflagration! This
also applies if a heating system already in operation goes out
and needs to be re-ignited.
If the gas supply line is filled with air, it can take up to two
minutes until the gas is ready to burn. Keep the control knob
pressed down and keep pressing the ignitor until the flame
burns.
5. In order to achieve even and quick distribution of warm air
and reduction of the surface temperature at the outlet grill for
warm air, we recommend that the heating system is operated
with the Truma warmer running.
The S 3004 P heating system (with Piezo push ignitor) is
constructed so that subsequent installation of an auto ig-
nitor is possible part no. 30580-01).
S 3004 / S 5004 with auto ignitor
Make sure that a battery is inserted before commissioning for
the first time (see „Battery change on auto ignitor“)!
1. Open gas cylinder and quick-acting valve in the gas supply
line.
2. Turn the control knob (a) into thermostat position 1 – 5 and
push down far as possible. Ignition takes place automatically
(audible ignition) until the flame burns.
0
1
2
3
4
5
5
4
3
2
1
O
a
Hold down the control knob for up to 10 seconds so that the
safety pilot responds.
Wait min. 3 minutes before re-igniting after a fault,
otherwise there is the risk of deflagration!
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trumatic S 3004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trumatic S 3004 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info