484603
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Installation and repair of the Truma Multivent fan may
only carried out by an expert.
When using control panels which are specific to the
vehicle or manufacturer, the electrical connection
must be effected in accordance with Truma interface
specifications.
For connection of the fan with air duct ÜR 65 mm dia.
to the installation box EKM or the rear panel with heat
deflector, a intake nozzle DM (fig. D: part no. 40670-00) is
required.
1. fig. C
Fix the fan (1) with two screws (2) to the floor, to the wall, to
the ceiling etc. (the fan works in all posi tions).
2. Push the ducts ÜR 65 mm dia. for the warm air distribu-
tion into the connection fittings and fasten with self tapping
screws (3).
3. Choose a place for the control panel (5) in a position which
is easy to view.
If flush mounting is not possible, Truma will supply an
on-surface frame (7 – part no. 40000-52600) as an
accessory on request.
4. Lay the cable (4) from the fan (1) to the place intended for
the operating unit (5). If required, use a cable 3 x 0.75 mm² as
an extension.
5. Drill a 55 mm diameter hole. Feed the connection cable
from the fan (4) and 12 V lead (9) from behind through the
hole in the wall, and connect it to the operating unit in accord-
ance with the connection diagram (fig. E).
1 = white
2 = brown
3 = green
= negative lead
+ = positive lead 12 V
Fig. C
Fit the rear cover cap (8) as a stress-relieving device, then se-
cure the control panel (5) with 4 screws (10) and fit the cover
frame (6).
Truma offers side parts (11) in eight different colors for
finishing the cover frames (6) in a visually pleasing way.
Please ask your dealer.
Connect fan to fused vehicle power supply (central electrical
system 5 – 10 A) using a cable 2 x 0.75 mm². When connect-
ing directly to the battery, always fuse the positive and nega-
tive lead.
Secure all cables with cable clips.
When power supplies are being used, it must be noted
that the output voltage is between 11 V and 15 V and the
alternating current ripple is < 1.2 Vss.
Function test
After installation, check all the functions in accordance with
the Operating Instructions.
The operating instructions must be handed over to the user!
Installation instructions
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trumatic Multivent TBM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trumatic Multivent TBM in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info