484603
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
Einbau und Reparatur des Truma Multivent darf nur vom
Fachmann durchgeführt werden.
Bei Verwendung von fahrzeug- bzw. herstellerspezifischen
Bedienteilen muss der elektrische Anschluss gemäß
den Truma Schnittstellenbeschreibungen erfolgen.
Für den Anschluss am Ein bau kasten EKM oder der Rück-
wand mit Wärmeleit blech mittels Lüfterrohr ÜR Ø 65 mm
ist eine Ansaug düse DM (Bild D: Art.-Nr. 40670-00) erforderlich.
1. Bild C
Gebläse (1) mit 2 Schrauben (2) an Boden, Wand, Decke usw.
befestigen (Gebläse funktioniert in jeder Lage).
2. Lüfterrohre Ø 65 mm (ÜR) in die Rohrstutzen einschieben
und mit Blechschrauben (3) sichern.
3. Platz für das Bedienteil (5) an gut sichtbarer Stelle vorsehen.
Ist eine Unterputzmontage nicht möglich, liefert Truma
auf Wunsch einen Aufputzrahmen (7 – Art.-Nr. 40000-
52600) als Zubehör.
4. Kabel (4) vom Gebläse (1) zum vorgesehenen Platz für das
Bedienteil (5) verlegen. Falls erforderlich, mit einem Kabel
3 x 0,75 mm² verlängern.
Einbauanweisung
5. Loch Ø 55 mm bohren. Anschlusskabel vom Gebläse (4)
und Zuleitung 12 V (9) von hinten durch die Bohrung in der
Wand führen und gemäß Anschlussschema (Bild E) am
Bedienteil anklemmen.
1 = weiß
2 = braun
3 = grün
= Zuleitung Minus
+ = Zuleitung Plus 12 V
Bild C
Hintere Abdeckkappe (8) als Zugentlastung aufsetzen und
Bedienteil (5) mit 4 Schrauben (10) befestigen. Anschlie ßend
Abdeckrahmen (6) aufstecken.
Zum optischem Abschluss der Abdeckrahmen (6) liefert
Truma Seitenteile (11) in 8 verschiedenen Farben. Bitte
fragen Sie Ihren Händler.
Gerät am abgesicherten Bordnetz (Zentralelektrik 5 – 10 A) mit
Kabel 2 x 0,75 mm² anschließen. Bei direktem Anschluss an
die Batterie ist die Plus- und Minusleitung abzusichern.
Alle Kabel mit Kabelschellen sichern.
Bei Verwendung von Netz teilen ist zu beachten, dass die
Ausgangsspannung zwischen 11 V und 15 V liegt und
die Wechselspannungswelligkeit < 1,2 Vss beträgt.
Funktionsprüfung
Nach dem Einbau sämtliche Funktionen gemäß der Gebrauchs-
anweisung prüfen.
Die Gebrauchsanweisung ist dem Betreiber auszuhändigen!
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trumatic Multivent TBM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trumatic Multivent TBM in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info