484609
80
Zoom out
Zoom in
Previous page
1/88
Next page
80
Instrucción para localización de fallos
Fallo Causa Eliminación
Después de la conexión, no
se ilumina ningún LED.
Sin tensión de servicio.
Fusible defectuoso en el
aparato o el vehículo.
Comprobar la tensión de la batería de 12 V / 24 V y cargar
en caso necesario.
Comprobar todas las uniones enchufables del sistema
eléctrico.
Comprobar el fusible del aparato o del vehículo, sustituir en
caso necesario (véase Fusibles).
Después de la conexión se
ilumina el LED verde, pero la
calefacción no funciona.
La temperatura ajustada
en la unidad de mando es
más baja que la temperatu-
ra ambiente.
Elevar la temperatura ambiente en la unidad de mando.
El LED rojo parpadea 1 vez
por segundo.
El LED rojo parpadea 3 vez
por segundo.
Ventana abierta sobre la
chimenea (interruptor de
ventana).
Gama de baja tensión
12 V: 10,9 V – 10,5 V
24 V: 21,8 V – 20,7 V.
Gama de sobretensión
12 V: 15,8 V – 16,4 V
24 V: 31,8 V – 33,1 V.
Cerrar la ventana.
¡Cargar la batería!
Comprobar la tensión de la batería y las fuentes de tensión
como p.ej. el cargador.
Unos 30 s después de co-
nectar la calefacción, se
ilumina el LED rojo.
Botella de gas o válvula de
cierre rápido cerrada en la
línea de alimentación de
gas.
Entrada de aire de com-
bustión o salida de gases
de escape cerradas.
Comprobar la entrada de gas y abrir las válvulas.
Retire la tapa de la chimenea.
Comprobar si los orificios presentan suciedad (nieve
semiderretida, hielo, hojarasca, etc.) y, en caso necesario,
retirarla.
La calefacción cambia a
«Fallo» después de un perio-
do de funcionamiento más
largo.
Salidas de aire caliente
bloqueadas.
Aspiración de aire de
circulación bloqueada.
Reguladores de presión de
gas congelado.
Comprobar individualmente los orificios de salida.
Eliminar los bloqueos de la aspiración de aire de circulación.
Utilizar la calefacción de regulador (EisEx).
Si estas medidas no solucionasen la avería, diríjase por favor al servicio técnico de Truma.
Si estas medidas no solucionasen la avería, diríjase por favor al servicio técnico de Truma.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trumatic E 4000 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trumatic E 4000 A in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 6,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info