Manual Trumatic C 6002 EH (page 12 of 56) (English, German, Dutch, Danish, French, Italian, Spanish)

484640

Zoom out

Zoom in

1/56

The water container used is

made of stainless steel, which

is foodstuff-compatible.

Use wine vinegar for descal-

ing the water heater, this

being introduced into the ap-

pliance via the water supply.

Allow the product to react

and then thoroughly flush

out the appliance with plenty

of fresh water. To sterilise

the water we recommend

„Certisil-Argento“. Other

products, particularly those

containing chlorine are

unsuitable.

To avoid infestation by micro-

organisms, the boiler must

be heated to 70°C at regular

intervals (only possible in

winter operation).

Do not use the water as

drinking water!

Fuses 12 V

The 12 V fuses for the device

are located on the electronic

control unit (12).

The fine-wire fuse must only

be replaced by a fuse of the

same design.

F1: 6.3 A, slow-acting

F2: 1.6 A, slow-acting

Fuse 230 V

The fuses and power connec-

tion cables must always be

replaced by experts!

Disconnect all poles

of the unit from the

mains before opening the

housing containing the power

electronics.

The 230 V fuse of the unit is

in the power electronics (13)

on the unit.

This fine fuse must always be

replaced with a fuse of the

same type: 10 A, slow, inter-

rupting capacity „H“.

Overheating

protection 230 V

The 230 V heating facility

has a mechanical overheat-

ing switch. If the 12 V power

supply is interrupted during

operation or during the after-

run period, for example, the

temperatures within the unit

could trigger the overheating

protection.

To reset the overheating pro-

tection, let the heater cool

down, slide cover on power

electronics (13) upwards and

push in the red button.

Always use original Truma

spare parts for maintenance

and repair work.

1. If the cowl has been

placed near or directly be-

neath an opening window,

the device must be equipped

with an automatic shut-off

device in order to prevent

operation with the window

open.

2. The integrity and tight fit of

the exhaust gas double duct

must be checked regularly,

particularly at the end of long

trips. Also check the mount-

ing of the appliance and the

cowl.

3. Following a blow-back

(misfire) always have the ex-

haust gas system checked by

an expert!

4. Always keep the cowl for

the exhaust duct and com-

bustion air intake free of con-

tamination (slush, ice, leaves

etc.).

5. The liquid gas burner oper-

ates fan-supported, which

ensures trouble-free function

even when on the move.

National restrictions must

be observed with regard to

operation when on the move.

6. The installed temperature

limiter shuts off the gas sup-

ply if the appliance becomes

too hot. Therefore do not

shut the warm air outlets and

the opening for the returning

circulating air.

7. The installer or vehicle

owner must apply the yellow

sticker with the warning in-

formation, which is enclosed

with the appliance, to a place

in the vehicle where it is

clearly visible to all users

(e.g. on the wardrobe door)!

Ask Truma to send you

stickers, if necessary.

8. Directive 2004/78/EC stipu-

lates that a safety shut-off

device is required if motor

homes are being heated

while driving. The safety

shut-off device is also recom-

mended for safety reasons

if caravans are being heated

while driving.

The Truma SecuMotion gas

pressure regulator meets this

requirement.

If no Truma SecuMotion

gas pressure regulator

is installed, the gas cylinder

must be closed whilst driving

and information signs must

be attached to the cylinder

cabinet and in the vicinity of

the control panel.

Maintenance Important operating notes

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trumatic C 6002 EH in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trumatic C 6002 EH Manual

Product: