590215
25
Zoom out
Zoom in
Previous page
1/96
Next page
25
Mark connection pipe in the centre. Loosely attach the drive
assemblies to the connection pipe.
Do not screw in the supplied threaded bolts (g) yet.
Figure 23
Place the drive assemblies with the connection pipe and
mounting kit (b) on the vehicle frame and bolt them on with
the two bolts (c) in such a way that it is just possible to move
them along the frame.
The gripper (a) must be lying flat against the chassis
frame (e) in its entirety and also flat against the leg (d).
c
a
d
e
Figure 24
b
Figure 25
If the frame is not high enough, Truma can provide 30 mm
and 60 mm spacer sets as accessories in order to compen-
sate for this.
30 mm spacer set, part no. 60030-95000
60 mm spacer set, part no. 60030-95100
Make sure that there is adequate ground clearance (at least
110mm).
Driving direction
min. 110 mm
Mover
Figure 26
Set the correct distance between tyres and rollers (20 mm)
with the spacer gauge provided by moving the drive assem-
blies (in the disengaged position) in the longitudinal direction.
The movable connection pipe makes it possible to adjust to
the frame width.
Driving direction
20 mm
min. 110 mm
Figure 27
Move the drive assemblies in a lateral direction in such a way
that as much of the tread area of the tyre / drive roller as poss-
ible is covered.
Once the drive assemblies have been correctly positioned,
tighten the bolts (c) of the mounting set a little, then check the
required distances again. The weight of the caravan must be
resting on the wheels when doing this.
Place the movable connection pipe in the centre (use the mark-
ing) and fix each side with a threaded bolt (g) M8 x 12 (15 Nm).
The threaded bolts are coated with sealant, and must
therefore only be bolted in once.
Re-check the distance of 20mm from the tyre (with the
wheels under load). Then tighten the 2 bolts of the mounting
set (M10) alternately to 25 Nm.
25 Nm
Figure 28
The bolts are coated with sealant, and must therefore
only be bolted in once.
Position indicator
Indicates how far the Mover®XT / XT2 is engaged.
No number visible: Disengaging position
Numbers 1 to 3 visible: Engaging position
Mover
Figure 29
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma Mover XT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover XT2 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish as an attachment in your email.

The manual is 11,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info