Manual Truma Mover Mover TE R4 (page 14 of 84) (English, German, Dutch, Danish, French, Italian, Spanish)

484649

Zoom out

Zoom in

1/84

When operating the Mover®, ensure that no hairs, fingers

or other body parts, clothing or any other objects carried on

the body can become trapped by moving or rotating parts

(e.g. drive rollers).

The distance between the radio remote hand set and the

centre of the caravan when manoeuvring must not

exceed 10 m!

In the event of malfunctions pull on the handbrake.

To prevent the caravan from tipping, direct the tow hitch

downhill when manoeuvering down a slope.

After manoeuvring, always apply the handbrake first, dis-

engage the drive rollers from the tyres and block the

wheels (particularly on downwards-sloping surfaces). The

Mover® is not suitable for use as a parking brake for a

parked caravan.

Ensure that remote radio control is protected from unau-

thorised access (particularly by children!).

Never tow the caravan with the drive rollers applied. This

can cause damage to the tyres, the towing vehicle and the

drive units.

All wheels and tyres on the caravan must be of the same

size and design.

In order to ensure that the Mover® operates correctly, the

distance between the tyres and the disengaged drive rollers

must be 20 mm. All tyres must have the same inflation pres-

sure as per the manufacturer’s instructions (check at regu-

lar intervals!). If tyres are worn or new tyres are fitted, the

distance between the drive rollers and the tyres may need

readjusting (see “Installation of the drive units”).

Do not use the Mover® as a support when jacking up the

caravan, since this can damage the drive unit.

Sensitive objects such as cameras, DVD-Players etc. must

not be kept in the stowage box near the control unit or the

motor cable. They can be damaged by the electromagnetic

fields.

The empty weight of the vehicle increases by the weight of

the Mover®, which reduces the payload of the vehicle.

Remove plug from safety socket after manoeuvring, other-

wise the battery will be discharged. Standby current with

plug inserted approx. 300 mA. Standby current with plug

removed < 2 mA.

General instructions

The Mover® TE R4 was developed to overcome pitches of up

to 10 % for a total weight of 3000 kg on suitable ground.

Depending on the weight of the caravan, the Mover® can-

not overcome obstructions that are more than about 3 cm in

height without assistance (please use wedges as a ramp).

Due to the nature of a radio signal, it can get corrupted by ex-

ternal terrain or objects. So there may be small areas around

the caravan where the quality of reception reduces, hence the

Mover® may stop momentarily.

When the Mover® is switched off using the remote

control the control unit remains in standby. In order to

switch off completely the battery must be disconnected or an

isolating switch installed.

–

Table of contents

Symbols used ...................................................................... 14

Safety instructions .......................................................... 14

General instructions ........................................................ 14

Batteries ............................................................................ 15

Function description ........................................................ 15

Operating instructions

Remote handset .................................................................. 15

Remote hand set LED flash codes and acoustic signal ...... 16

Changing the batteries in the remote handset ................... 16

Manoeuvring the caravan ............................................... 16

Hitching to a tow car ....................................................... 16

Maintenance ..................................................................... 16

Checks ................................................................................. 17

Emergency disengaging function ....................................... 17

Trouble-shooting .............................................................. 17

Synchronising the electronic control unit with the radio

remote hand set .................................................................. 17

Technical data ................................................................... 17

Conformity Declaration ................................................... 18

Manufacturer’s terms of warranty ................................ 18

Installation instructions

Intended use ........................................................................ 19

Approval .............................................................................. 19

Tools and facilities required ................................................. 19

Minimum installation dimensions ....................................... 19

Measuring the chassis height ............................................. 19

Determining the installation type ........................................ 19

Special accessory installation ............................................. 20

Choice of location ............................................................... 20

Installation of the drive units ......................................... 20

Installation of motor cables and control unit .............. 21

Connecting diagram ........................................................... 22

Isolating switch connection ................................................ 22

Connecting the drive motors .............................................. 22

Connecting the engagement motors .................................. 22

Connecting the battery ....................................................... 22

Safety socket connection with conventional brake lights .. 23

Safety socket connection with LED brake lights ................ 23

Commissioning the Mover® ............................................ 24

Warning information ........................................................... 24

Mover® TE R4

Symbols used

Symbol indicates a possible hazard.

Comment including information and tips.

Safety instructions

The control systems TE R4 (master or slave) may only be

used for the Mover® TE R4.

Practice operating the Mover® in an open area before using

for the first time. This to fully familiarise yourself with

the handset / Mover® operation.

Always check tyres and drive rollers before using the equip-

ment; remove sharp-edged stones and the like if necessary.

No person must be present in the caravan during operation.

All persons (particularly children) must remain outside

the Mover® operating area.

–

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover Mover TE R4 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 12,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Truma Mover Mover TE R4 Manual

Product: